Enter your search terms below:

Filters

Clear all

Language

Resource Type

290 results found

Required Tools for Weather Station Setup

Required tools for weather station setup:

Read tech note

Extending a Tripod

It is possible to extend a tripod; however, the 1.5-meter mast (Part #M-MPB) cannot be used directly to extend a 2- or 3-meter tripod.

Read tech note

Logging RH without Temp

The Bluetooth-enabled HOBO MX1101 and HOBO MX1102 loggers both use a Relative Humidity sensor that returns a temperature-compensated RH measurement.

Read tech note

CX and MX Gateway Networking Information

The following URLs must be allowed in order to use Onset CX and MX Gateways on any network. (No other time protocols can be used.)

Read tech note

How to get MX logger data to HOBOware through HOBOlink

Step 1. Set up a HOBOlink account if you do not have one already.

Read tech note

How to turn on and deliver HOBOware log files

1.Open HOBOware and click HELP>ENABLE LOGGING. Then close out of HOBOware completely.

Read tech note

Wiring Multiple 4-20mA Loops with a Single Power Supply

Read tech note

HOBOware Pro vs HOBOware Free

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers.

Read tech note

How to configure differential pressure for bidirectional scaling

Set the PXU sensor to Bidirectional mode by moving the jumper to BI, as described in the attached manual.

Read tech note

How to deploy a data logger in turbulent water

See image for a quick deployment idea for an underwater logger, such as the HOBO Water Temp Pro v2 or the HOBO U24 Conductivity logger.
Read tech note