Resources for BASE-U-1

HOBO Optic USB Base Station for Pendant

BASE-U-1 Data Sheet
6 results found.

Visit Onset's YouTube Channel

Watch how-to video

Optic logger communication problems

All Users: HOBO Optic data loggers must be inserted into the Base Station (or Shuttle) using the appropriate coupler for that logger in order for the computer to detect them. Note: HOBOware will not detect the Base Station alone as an attached USB device. Check to make sure that the coupler is positioned properly and the magnet end is closest to the data logger, not the Base Station or the Optic Shuttle.
Read tech note

Optic data logger not recognized by HOBOware using Windows 8.1 or Windows 10

The new Windows power-saving updates may cause the Base Station (part number BASE-U-4) and Waterproof Shuttle (part number U-DTW-1) to appear inactive even though a data logger is physically attach

Read tech note

Sample Data - Outdoor Light - HOBO UA-002-64 Pendant

Attached is a screenshot from a HOBO UA-002-64 Pendant data logger that was programmed to measure light and temperature outdoors at a five-minute logging interval over a one-week period.

Read tech note

How to use the HOBO Pendant Coupler Start feature

Learn how to use the Coupler Start feature on HOBO Pendant Data Loggers
Watch how-to video

Troubleshooting communication issues with USB data loggers, base stations, and shuttles

If you're experiencing communication issues with your USB data logger, base station, and shuttle, here are a few things to consider:

If using Windows -

Read tech note