CX450
InTemp Temp/Relative Humidity Data Logger
Important Information
For automatic downloads and remote alerts, InTemp loggers require the optional InTemp CX Gateway. MORE INFORMATION
Overview
The InTemp CX450 Temp/RH data logger monitors temperature and relative humidity in storage and transportation environments. It uses Bluetooth technology to wirelessly communicate with the InTemp CX Gateway and/or the free InTemp mobile app, and sends data to the free InTempConnect cloud platform. The external sensor provides highly accurately temperature (-30C to 70C) and humidity (0% to 95%) readings.
This Temp/RH logger also features a built-in LCD display to view temperature and relative humidity readings, visual and unique audible alarms, and battery level. Users can also view and display minimum and maximum readings, without affecting logged data.
By adding the InTemp CX Gateway, users can get text or email notifications of temperature and/or humidity excursions, as well as automatic data downloads from loggers within range of the CX Gateway device.
Required to follow GDP & GMP requirements specifically
- Internal temp and humidity sensor only (No probe)
- GDP/GMP compliant
- Refrigerated to ambient monitoring
- Humidity monitoring
Learn more about our compatible mobile and cloud solutions:
InTempConnect A cloud-based data command-center control for monitoring all loggers throughout your global supply chain, including configuration, user management & data reporting
InTemp App A free mobile app that streamlines logger configuration and readout, and automatically uploads reports to InTempConnect
InTempVerify A free mobile app that enables data downloads by anyone—anywhere, anytime
Features
- Includes two-point NIST Certificate of Calibration, per USP guidelines, which is good for one year
- Integrates with mobile and cloud platforms for a 21 CFR Part 11 compliant solution
- Easy logger setup and data download in seconds
- LCD display, with ability to clear min/max temp and RH readings
- Unique audible alarms for temp, RH, and combined temp/RH
- AAA battery-powered to guard against local power loss
- + 0.5C accuracy for reliable temperature readings from -30°C to 70°C
- + 3% accuracy for reliable RH readings from 0% to 90% (+ 3.5% accuracy for reliable RH readings greater than 90% at 25°C)
- Free InTemp mobile app to configure logger, view data, and access the free InTempConnect cloud software service
- Real-time alerts and automatic data downloads with optional InTemp CX Gateway device
Specifications
Temperature Sensor
-
-30° to 70°C-22° to 158°F
-
±0.5°C from -30° to 70°C±0.9°F from -22° to 158°F
-
0.024°C at 25°C0.04°F at 77°F
-
Two-point NIST calibration included
RH Sensor
-
0 to 95%non-condensing
-
±3% from 0% to 90% and ±3.5% from greater than 90% typical at 25°C77°F
-
0.01%
Logger
-
1 mW0 dBm
-
Approximately 30.5 m (100 ft) line-of-sight
-
Bluetooth Low Energy (Bluetooth Smart)
-
-30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
-
1 second to 18 hours
-
Two AAA batteries, user replaceable
-
1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life.
-
178 KB (51,700 temp & RH paired measurements)
-
Approximately 60 seconds; may take longer the farther the device is from the logger
-
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
-
9.4 x 5.6 x 2.59 cm3.7 x 2.21 x 1.02 inches
-
90.2 g3.18 oz
-
IP54
Notices
-
Passed RTCA DO160G, part 21H
