Enter your search terms below:

Filters

Clear all

Language

Topic

139 results found

Troubleshooting communication issues with USB data loggers, base stations, and shuttles

If you're experiencing communication issues with your USB data logger, base station, and shuttle, here are a few things to consider:

If using Windows -

Read tech note

Connecting to the eGauge without a network

Below are the recommended steps to establish communication with an eGauge when the eGauge Ethernet port is directly connected to the Ethernet port of a computer, and the eGauge is configured for DH

Read tech note

UX Logger Firmware Update Troubleshooting

If you are having trouble updating the firmware on your UX logger, try these steps:

Read tech note

Build Your Own Thermistor

For instructions on how to build your own thermistor, please see attachment.

Read tech note

Brand New Ultrasonic Wind Speed Sensor (S-WCG-M003) Not Working

If you connect the battery to your brand new Ultrasonic Wind Speed Sensor (S-WCG-M003) and it does not appear to be working, just bring the sensor outside in the daylight for a bit.

Read tech note

Changing Out the Electrode on the HOBO MX2501 pH Logger

This video resouce will show you how to easily change out the electrode on your pH logger.

Read tech note

Voltage Divider for High Voltage Measurements

Please see attached.

Read tech note

HOBO RX3000 and the TRMSA-D FlexSmart Module

If you are using both TRMSA-D FlexSmart modules and smart sensors with your HOBO RX3000 station, you are limited to a maximum of three TRMSA-D modules and any combination of smart sensors to reach

Read tech note

Exporting Data from EG4100 Series Devices

From the home screen, click the export button in the upper left of the graph (highlighted in yellow below).

Read tech note

Water-Detect Feature in the HOBO MX2501 pH Logger is Not Working

The HOBO MX2501 pH logger's battery-saving water-detect feature is only guaranteed to work in water with at least 100 µS/cm conductivity.

Read tech note