0.2 mm Rainfall (2m cable) Smart Sensor
Overview
This Rain Gauge Smart Sensor measures rainfall with a resolution of .2 mm, and 1% accuracy for rainfall rates up to 12.7 cm. The tipping bucket mechanism is mounted on a stainless steel shaft with brass bearings. This model includes a 2m cable.
Also available in a wireless model for use with the HOBOnet Field Monitoring System.
- Measures rainfall rates up to 12.7 cm per hour
- Resolution of 0.2 mm
- Maximum of 4000 tips per interval
- 2m cable
In what environment does this sensor operate?
This sensor operates in an outdoor environment.
What measurements does this sensor support?
The S-RGB-M002 sensor supports the following measurement: Rainfall
The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.
- Measurement range: 0–12.7 cm or 0–5 in. per hour; maximum 4000 tips per interval
- Operating range: 0° to 50°C (32° to 122°F); survival -40° to 75°C (-40° to +167°)
- Mechanism: Tipping bucket, stainless steel shaft with brass bearings
- Resolution: 0.2 mm (S-RGB) 0.01 inch (S-RGA) models
- Calibration: Requires annual calibration; can be field calibrated by user or returned to factory
- Calibration accuracy: ±1.0% at up to 20 mm or 1" per hour
- Housing: Aluminum housing and collector
- Dimensions: 22.8 cm height x 15.4 cm diameter (9" height x 6" diameter), 154 mm receiving orifice (6.06")
- Approximate weight: 1 Kg (2 lbs)
- Cable lengths: 2 meter, 6.5 feet
Note: Comes with side bracket for post or tripod mount and feet for surface mount. If mounting separate from main tripod, order with 6m cable and an additional 1.5m mast. If mounting on main tripod, order with guy wire kit.
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!
Customers Also Bought
The HOBO MicroRX Water Level Station is a cellular, web-enabled water level monitoring solution for stormwater, floodwater, irrigation, hydrologic, and environmental applications. Pre-programmed water flow formulas for select weirs, flumes, and a stage discharge table result in an easy and intuitive configuration.
New water flow and accumulated rainfall calculations, which are performed directly on the station at time of measurement, trigger immediate notifications of critical water level conditions.
The compact and durable station, together with the non-vented water level sensor, enables harsh condition deployments and reliable monitoring. The optional integrated solar panel or battery power, with a wide range of plug-and-play smart sensors, supports flexible environmental monitoring.
A 6.5-inch long, Xenoy weatherproof housing that protects the connection between sensors and sensor extension cables (S-EXT-M0xx).
A 10-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
A 25-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptor
Recently Viewed
Detailed Specifications
0.2 mm Rainfall (2m cable) Smart Sensor
- Measurement range: 0–12.7 cm or 0–5 in. per hour; maximum 4000 tips per interval
- Operating range: 0° to 50°C (32° to 122°F); survival -40° to 75°C (-40° to +167°)
- Mechanism: Tipping bucket, stainless steel shaft with brass bearings
- Resolution: 0.2 mm (S-RGB) 0.01 inch (S-RGA) models
- Calibration: Requires annual calibration; can be field calibrated by user or returned to factory
- Calibration accuracy: ±1.0% at up to 20 mm or 1" per hour
- Housing: Aluminum housing and collector
- Dimensions: 22.8 cm height x 15.4 cm diameter (9" height x 6" diameter), 154 mm receiving orifice (6.06")
- Approximate weight: 1 Kg (2 lbs)
- Cable lengths: 2 meter, 6.5 feet
Note: Comes with side bracket for post or tripod mount and feet for surface mount. If mounting separate from main tripod, order with 6m cable and an additional 1.5m mast. If mounting on main tripod, order with guy wire kit.
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)