Image
25 results found.
SMS text messaging
Sending SMS through mobile phones is easy. If you can be reminded through email, you can now be reminded through SMS.
Read tech note
Connecting a 4-20mA to an external input
The 4-20mA cable (CABLE-4-20mA) measures currents from 0 to 20.1mA. The cable must be connected such that the current flows through, and with the proper polarity, as shown in the diagram. (Do not expose to current above 20mA or negative current.) Do not cut off the end of the gray cable where it connects to the blue and yellow wires, as this contains the precision resistor required for current measurements.
Read tech note
Wiring Diagram - Monitoring Differential Air Pressure with a UX120-006M or ZW
Attached is a diagram that shows how to connect a Veris Differential Air Pressure Sensor (T-VER-PX-Series) with a UX120-006M logger, or a ZW-006 or ZW-008 data node.
Read tech note
Wiring Diagram - How to Connect Multiple Sensors to One AC-SENS-1 Power Supply
Attached is a drawing that shows you how to power multiple external sensors with (1) AC-SENS-1 Power Supply.
Please note that the AC-SENS-1 can supply 12VDC to a maximum load of 400mA.
Read tech note
Installing HOBOware and Managing License Keys
Learn how to install and manage your HOBOware software application.
Watch how-to video
How to change your default units preference in HOBOware
Learn how to change your default units preference in HOBOware (like degrees F to degrees C for example)
Watch how-to video
Wiring Diagram - Monitoring Three-phase Energy using the ZW Wireless Data Node and the Wattnode kWh Transducer
Attached is a wiring diagram that shows how to connect a Wattnode kWh Transducer to a HOBO ZW-008 or ZW-005 wireless data node to log energy consumption on a 3-phase circuit.
Read tech note