Image
Enter your search terms below:
37 results found
Adding or Removing Smart Sensors from a HOBO RX3000 Station
To add or remove smart sensors from a HOBO RX3000 station:
1. If the station is currently logging, press the Stop button to stop it.
Read tech note
Installing Onset soil moisture sensors
Use the attached guide as a reference when deploying soil moisture Smart Sensors.
Read tech note
Smart Sensor Sampling Interval
When a sampling interval is configured, the station or logger will take multiple measurements within a given logging interval and then average them together to create a single logged data point.
Read tech note
Smart sensor cable fix
Problem: My smart sensor data shows a -888.888 for a good portion of the data file.
Note: -888.888 means that the logger could not find the smart sensor after the logger was launched successfully.
Read tech note
Calibrating ECH2O Soil Moisture Sensors Application Note
Onset adds smart sensor adapters to the ECH2O probes so that they are plug‐and‐play compatible with HOBO® U30 stations and HOBO Micro Stations.
Read tech note
Calibrating S-SMC-M005 and W-SMC Soil Moisture Sensors
The attached application note - Calibration Equations for the S-SMC-M005 Soil Moisture Sensor - details the process for calibrating soil moisture data.
Read tech note
Wiring Diagram - HOBO RX3000 - Wiring Analog Sensors to the RXMOD-A1 Module
Attached is a diagram that shows how to connect sensors to the optional 4-channel RXMOD-A1 analog input module.
Read tech note
Wiring Diagram - How to Connect Multiple Sensors to One AC-SENS-1 Power Supply
Attached is a drawing that shows you how to power multiple external sensors with (1) AC-SENS-1 Power Supply.
Please note that the AC-SENS-1 can supply 12VDC to a maximum load of 400mA.
Read tech note