Enter your search terms below:

Filters

Clear all

Topic

6 results found

How to configure HOBOlink for use with your Wattnode Energy Transducer

Learn how to connect and configure the Continental Controls Wattnode Energy Transducer for use with the HOBO U30 and RX3000 Stations via HOBOlink.
Watch how-to video

How to use the HOBO U-Shuttle - U-DT-1 with HOBOware Pro

Learn how to properly use the HOBO U-Shuttle with Onset's HOBOware Pro software. Note that operation of the HOBO U30 Shuttle - U-DT-2 is the same as the U-DT-1 in HOBOware Pro.
Watch how-to video

RX3000 & U30 Networking, Firewall Problems

Network firewall difficulty: The network interface controller (NIC) in the HOBO RX3000 and U30-ETH and WIF will attempt to make a connection to the numerical IP address 208.85.146.151:54328 every "Readout Interval." Your firewall must allow the logger to connect to this IP address, and must also allow the MAC address of the logger NIC.
Read tech note

Sample Data - HOBO U30 Station Compressed Air Flow and Compressor Power Monitoring

Attached is a screenshot from a HOBOware data file from a HOBO U30 Station that recorded compressed air flow in SCFM and compressor power in kW.

Products used were:

Read tech note

Sample Data - HOBO U30 Station Monitoring Soil Moisture, Leaf Wetness, and Soil Temperature on a Green Roof

Attached is a screenshot from a HOBOware data file recorded by a HOBO U30 Station that recorded soil moisture, leaf wetness, and soil temperature as part of a green roof project.

Read tech note

Software Utilities for HOBO Monitoring Products

Software utilities and resources for various HOBO products, including RX stations.
Read tech note