Enter your search terms below:

Filters

Clear all

Topic

381 results found

Using Baker's Yeast in the HOBO U26 Dissolved Oxygen (DO) Logger Calibration Process

Please refer to the attached document for instructions on how to use baker’s yeast (instead of sodium sulfite solution) for Step 2 of the HOBO U26 dissolved oxygen (DO) logger three-step calibration p
Read tech note

How To Add the HOBOnet Manager to a HOBO RX3000 Station

Please click one of the links below for help adding a HOBOnet Manager to a HOBO RX3000 station.

On YouTube

Read tech note

How-To Videos for Adding Sensors to a HOBOnet Wireless Network

Please click on a link below for help adding a wireless sensor to an existing HOBOnet network.

On YouTube:

Read tech note

HOBO MX2501 Calibration Solution Safety Data Sheet

Click on the link below for the HOBO MX2501 calibration solution safety data sheet (SDS)

Read tech note

Connecting to the eGauge without a network

Below are the recommended steps to establish communication with an eGauge when the eGauge Ethernet port is directly connected to the Ethernet port of a computer, and the eGauge is configured for DH

Read tech note

Determining the Appropriate Cable Length for Stevens Sensor

Read tech note

Build Your Own Thermistor

For instructions on how to build your own thermistor, please see attachment.

Read tech note

Reference Evapotranspiration (ET) Setup Considerations

Reference Evapotranspiration (ET) Setup Considerations:
  • Channels must be selected from the same HOBO RX30
Read tech note

Voltage Divider for High Voltage Measurements

Please see attached.

Read tech note

HOBO RX3000 and the TRMSA-D FlexSmart Module

If you are using both TRMSA-D FlexSmart modules and smart sensors with your HOBO RX3000 station, you are limited to a maximum of three TRMSA-D modules and any combination of smart sensors to reach

Read tech note