Image
Enter your search terms below:
23 results found
Installing Onset soil moisture sensors
Use the attached guide as a reference when deploying soil moisture Smart Sensors.
Read tech note
Smart Sensor Sampling Interval
When a sampling interval is configured, the station or logger will take multiple measurements within a given logging interval and then average them together to create a single logged data point.
Read tech note
Smart sensor cable fix
Problem: My smart sensor data shows a -888.888 for a good portion of the data file.
Note: -888.888 means that the logger could not find the smart sensor after the logger was launched successfully.
Read tech note
Wiring Diagram - RX3000 and 15 Temperature Sensors with S-ADAPT-6
The attached drawing shows how to connect 15 smart temperature sensors to an RX3000 station via the S-ADAPT-6 Smart Sensor Consolidator Box.
Read tech note
Sample Data - Missing Smart Sensor -888.88 Error
Attached is a screenshot that shows the HOBOware error values displayed when a smart sensor is disconnected from a smart sensor-compatible logger, specifically the HOBO H21-002, U30, and H22-001.
Read tech note
Correcting Temperature Sensitivity of ECH2O Soil Moisture Sensors Application Note
Onset adds smart sensor adapters to the ECH2O probes so that they are plug‐and‐play compatible with HOBO® U30 stations and HOBO Micro Stations.
Read tech note
How-To Videos for Adding Sensors to a HOBOnet Wireless Network
Please click on a link below for help adding a wireless sensor to an existing HOBOnet network.
On YouTube:
Read tech note
Calibrating S-SMC-M005 and W-SMC Soil Moisture Sensors
The attached application note - Calibration Equations for the S-SMC-M005 Soil Moisture Sensor - details the process for calibrating soil moisture data.
Read tech note