Image
Enter your search terms below:
39 results found
Navigating the E50B2 Menus
Familiarize yourself with the T-VER-E50B2 menu structure
Watch how-to video
Troubleshooting communication issues with USB data loggers, base stations, and shuttles
If you're experiencing communication issues with your USB data logger, base station, and shuttle, here are a few things to consider:
If using Windows -
Read tech note
UX Logger Firmware Update Troubleshooting
If you are having trouble updating the firmware on your UX logger, try these steps:
Read tech note
Build Your Own Thermistor
For instructions on how to build your own thermistor, please see attachment.
Read tech note
Logging RH without Temp
The Bluetooth-enabled HOBO MX1101 and HOBO MX1102 loggers both use a Relative Humidity sensor that returns a temperature-compensated RH measurement.
Read tech note
How to configure differential pressure for bidirectional scaling
Set the PXU sensor to Bidirectional mode by moving the jumper to BI, as described in the attached manual.
Read tech note
Electrically Noisy or Incorrect Thermocouple Readings
Electrically noisy or incorrect thermocouple measurements can occur if the USB cable is left connected between the logger and computer during your deployment.
Read tech note