Image
Enter your search terms below:
53 results found
Thought Leader: The Heat is On—Monitoring Coral Bleaching in Honduras' Bay Islands
Learn how leading researchers use advanced monitoring techniques to track rising ocean temperatures, gain insights into coral bleaching and reef resilience, and develop strategies to protect our seas’ vital ecosystems.
Watch Webinar
Verifying RH accuracy on HOBO data loggers
Testing the accuracy of relative humidity sensors requires carefully-controlled conditions and a considerable amount of time. Please see the white paper Testing the Accuracy of Sensirion Relative Humidity Sensors in HOBO Data Loggers for complete details on the recommended procedure to follow.
Read tech note
Davis Rain Gauge (S-RGC-M002, S-RGF-M002 & S-RGE-M002) Cable Routing
See attached photos for clarification.
This is also covered in each product's respective manual, which can be found on the following product web pages under the Documentation tab:
Read tech note
U30 and excitation wiring with S-VIA-CM14 modules
Here is a wiring diagram for use with external sensors and the S-VIA-CM14s. Remember the excitation current required to power the external sensors cannot exceed 50 milliamps total.
http://www.onsetcomp.com/files/U30%20VIA%20and%20S_VIA_CM14.JPG
Read tech note
Sample Data - HOBO U30 Station Compressed Air Flow and Compressor Power Monitoring
Attached is a screenshot from a HOBOware data file from a HOBO U30 Station that recorded compressed air flow in SCFM and compressor power in kW.
Products used were:
Read tech note
Remote Water Level Monitoring Application (RX3000)
This technical note provides details on configuring the HOBO RX3000 Remote Monitoring Station with water level sensors with a 4-20mA output.
Read tech note
Wiring Diagram - Monitoring Differential Air Pressure with an RX3000
Attached is a diagram that shows how to connect and configure a Veris Differential Air Pressure Sensor (T-VER-PX-Series) with an RX3000 Station.
Read tech note
Remote Water Level Monitoring Application (U30)
The combination of the HOBO Remote Monitoring System/GSM and one or two third-party water level sensors with 4-20mA analog outputs provide a solution to remotely monitor water levels and access dat
Read tech note
Maximum sensor cable length
The entire network (all sensors combined) cannot exceed 100 meters. As long as your total cable length is below this, it does not matter how you designate the individual cable lengths. It is important to insure that the connections are weatherproof.
Read tech note
Possibility of exposure to chemicals or chemical vapors
This is dependent on the data logger you are using and the chemical and/or concentration of the chemical to which the data logger is exposed. Many chemicals will have an adverse effect on the data loggers and/or the sensors that the loggers utilize. Contact your authorized sales representative with questions regarding specific chemical contact with the data logger that you are using.
Read tech note