Image
Enter your search terms below:
25 results found
Installing Onset soil moisture sensors
Use the attached guide as a reference when deploying soil moisture Smart Sensors.
Read tech note
Smart Sensor Sampling Interval
When a sampling interval is configured, the station or logger will take multiple measurements within a given logging interval and then average them together to create a single logged data point.
Read tech note
Smart sensor cable fix
Problem: My smart sensor data shows a -888.888 for a good portion of the data file.
Note: -888.888 means that the logger could not find the smart sensor after the logger was launched successfully.
Read tech note
Calibrating ECH2O Soil Moisture Sensors Application Note
Onset adds smart sensor adapters to the ECH2O probes so that they are plug‐and‐play compatible with HOBO® U30 stations and HOBO Micro Stations.
Read tech note
Wiring Diagram - RX3000 and 15 Temperature Sensors with S-ADAPT-6
The attached drawing shows how to connect 15 smart temperature sensors to an RX3000 station via the S-ADAPT-6 Smart Sensor Consolidator Box.
Read tech note
Sample Data - Missing Smart Sensor -888.88 Error
Attached is a screenshot that shows the HOBOware error values displayed when a smart sensor is disconnected from a smart sensor-compatible logger, specifically the HOBO H21-002, U30, and H22-001.
Read tech note
Correcting Temperature Sensitivity of ECH2O Soil Moisture Sensors Application Note
Onset adds smart sensor adapters to the ECH2O probes so that they are plug‐and‐play compatible with HOBO® U30 stations and HOBO Micro Stations.
Read tech note
How-To Videos for Adding Sensors to a HOBOnet Wireless Network
Please click on a link below for help adding a wireless sensor to an existing HOBOnet network.
On YouTube:
Read tech note