Enter your search terms below:

Filters

Clear all

Applications

Resource Type

Topic

49 results found

Wind Data Averaging.xlsx

This spreadsheet includes the calculations described below and is also used to process wind data into the desired output logging interval.

Read tech note

How To Add the HOBOnet Manager to a HOBO RX3000 Station

Please click one of the links below for help adding a HOBOnet Manager to a HOBO RX3000 station.

On YouTube

Read tech note

How-To Videos for Adding Sensors to a HOBOnet Wireless Network

Please click on a link below for help adding a wireless sensor to an existing HOBOnet network.

On YouTube:

Read tech note

Determining the Appropriate Cable Length for Stevens Sensor

Read tech note

HOBO RX3000 and the TRMSA-D FlexSmart Module

If you are using both TRMSA-D FlexSmart modules and smart sensors with your HOBO RX3000 station, you are limited to a maximum of three TRMSA-D modules and any combination of smart sensors to reach

Read tech note

Required Tools for Weather Station Setup

Required tools for weather station setup:

Read tech note

Extending a Tripod

It is possible to extend a tripod; however, the 1.5-meter mast (Part #M-MPB) cannot be used directly to extend a 2- or 3-meter tripod.

Read tech note

Logging RH without Temp

The Bluetooth-enabled HOBO MX1101 and HOBO MX1102 loggers both use a Relative Humidity sensor that returns a temperature-compensated RH measurement.

Read tech note

Davis Rain Gauge (S-RGC-M002, S-RGF-M002 & S-RGE-M002) Cable Routing

See attached photos for clarification.

This is also covered in each product's respective manual, which can be found on the following product web pages under the Documentation tab:

Read tech note

Calibrating S-SMC-M005 and W-SMC Soil Moisture Sensors

The attached application note - Calibration Equations for the S-SMC-M005 Soil Moisture Sensor - details the process for calibrating soil moisture data.

Read tech note