Image
Part Number -
T-ACT-0750-020
20 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
0.78”(20mm) Opening
$105.00 USD
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Important Information
Refer to data logger product pages to ensure you have the proper interfaces (modules, adapter, etc.) to deploy this sensor.
Overview
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Features
- Unprecedented linearity
- Window opening 0.75 Inch
- The Accu-CT revenue grade, split-core current transformer offers outstanding linearity and phase angle accuracy with a unique one-handed opening and closing mechanism
- Safe: burden resistor built-in, 333 mVac voltage output at rated full scale current, no shorting blocks needed
- IEEE C57.13 and IEC 60044-1 accuracy: over full temperature range and down to 1% of rated current
- Exceptionally low phase angle error: essential for accurate power and energy measurements
- Glove-friendly: easy to open and install with one hand while wearing safety gloves
- Approvals: UL recognized, CE mark, RoHS
Specifications
Accuracy: ±0.75% from 1% to 120% of rated primary current
Phase angle: ±0.5 degrees (30 minutes) from 1% to 120% of rated current
Accuracy standards: IEEE C57.13 class 1.2 and IEC 60044-1 class 1.0
Primary rating: 5 to 250 Amps, 600 Vac, 60 Hz nominal
Output: 333.33 mVac at rated current
Operating temperature: -30°C to 55°C
Safe: integral burden resistor, no shorting block needed, unlessotherwise noted
Standard lead length: 8 ft (2.4 m), 20 AWG
UL recognized, CE mark, RoHS
Assembled in USA: qualified under Buy American provision in ARRA of 2009
Width: 2.38 inches
Height: 2.40 inches
Thickness: 0.90 inches
Window: 0.78 inches
Compatible items
USB Data Loggers - requires external sensor(s)
Web-based Monitoring Systems - via remote communication
USB Data Loggers - w/external sensor(s)
Sensors
Recently Viewed
Sensor
100 Amp Accu-CT Split-Core Current Transformer 333mV Sensor
The Accu-CT split-core current transformer offers outstanding accuracy and one-handed operation.
Sensor
Setra Differential Air Pressure - 0-0.25 inch WC Sensor
The 0-0.25 inch WC Differential Air Pressure sensor by Setra can be used for static or differential pressure in air or inert gases. This sensor is fully protected against reverse wiring and against over-pressure to 10psi, and outputs 0-5 VDC to the required FlexSmart Analog Module.
