Image
Part Number -
S-UCC-M001
Electronic Switch Pulse Input Adapter - 1 meter Sensor
$113.00 USD
Connects sensors with pulse outputs to data loggers with Smart Sensor inputs; compatible with electronic switch closures; 1 m cable length.
Overview
Connects sensors with pulse outputs to data loggers with Smart Sensor inputs. Compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second). See how the pulse recorder works.
Features
- Plug-n-play adapter for pulse output sensors
- Automatically recognized by H21, H22, U30, and RX Series data loggers
- 1m cable length (extension cables available)
Specifications
Maximum input frequency: 120 Hz (120 pulses per second)
Measurement range: 0 – 65,533 pulses per logging interval
Resolution: 1 pulse
Lockout time: 45 µs ± 10%
Recommended input type: Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
Preferred switch state: Active low input Normally open
Edge detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)
Minimum pulse width: 1 ms
Input/output impedance: 100 KΩ
Open circuit input voltage: 3.3 V
Maximum input voltage: 3.6 V
User connection: 24 AWG wires, 2 leads: white(+), black(-)
Operating temperature range: -40° to 75°C (-40° to 167°F)
Overall cable length: 1 m (3.3 ft.)
Housing: Weatherproof PVC housing protects input adapter electronics
Housing dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)
Weight: 310 g (11 oz.)
Bits per sample: 16
Number of data channels: 1
Measurement averaging option: No (reports the number of pulses over the logging interval)
Compatible items
USB Data Loggers - requires external sensor(s)
USB Data Loggers - w/external sensor(s)
Web-based Monitoring Systems - via remote communication
Kilowatt Hours (kWh)
Recently Viewed
Sensor
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor
For sub-metering, net-metering, energy management, and performance contracting applications, the WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms.
Sensor
HOBOnet Temp/RH Sensor
A solar-powered wireless sensor that works with the HOBOnet system to monitor air temperature and relative humidity.
