Image
Part Number -
S-CIA-CM14
12-bit 4-20 mA Input Adapter Sensor
$121.00 USD
Interfaces with any sensor providing a 4-20 mA signal to connect to HOBO stations compatible with Smart Sensors.
Overview
Interfaces with any sensor providing a 4-20 mA signal to connect to HOBO stations compatible with Smart Sensors. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering that improves measurement accuracy with 32 readings/sample and 60 Hz noise rejection.
Features
- 12-bit resolution
- Digital filtering improves measurement accuracy with 32 readings/sample; 4-20 mA adapter has 60 Hz noise rejection
- Measurement averaging over logging interval further enhances accuracy
- Plug-in modular connector for easy interface with HOBO stations
- Screw terminal for connecting to sensors
- HOBO RX3000 and U30 stations have room for two adapters
- Use with HOBO USB Micro Station and HOBO MicroRX Station requires Smart Sensor Consolidator Box (S-ADAPT-6) and an extension cable.
- Represents one data input channel
Specifications
Measurement range: 4-20 mA (measures down to 0 mA to detect error condition)
Operating temperature range: -40° to 75°C (-40° to 167°F)
Accuracy: ±40 µA ±0.3% of reading (over operating temperature range)
Resolution: ±4.93 µA
Input impedance: 124 ohms (differential input)
Sensor trigger source: Voltage: 2.5 V ±2.4%; maximum current: 1 mA
Warm-up time: 300 ms ±3% (fixed)
Measurement time: 16.6 ms ±3% to filter out 60 Hz noise
Cable length: 14 cm (5.5 inch)
Compatible items
USB Data Loggers - requires external sensor(s)
Web-based Monitoring Systems - via remote communication
USB Data Loggers - w/external sensor(s)
Customers Also Bought
Adapter
Smart Sensor Consolidator Box Adapter
Allows users to connect up to six Smart Sensors in a water-resistant enclosure to one sensor extension cable back to HOBO stations with Smart Sensor inputs.
Cable
Smart Sensor Extension Cable - 2m length
A 2-meter Smart Sensor male-to-male extender cable, plus a female-to-female adapter.
Recently Viewed
Sensor
0.01" Rain Gauge (2m cable) Smart Sensor
Measures rainfall with intensity up to five inches per hour with a resolution of 0.01 inch, and 1% accuracy for rainfall rates up to 1"/hour. *Requires a data logger.
Sensor
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor
For sub-metering, net-metering, energy management, and performance contracting applications, the WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms.
