HWS 3m Tripod Tower with mast
Part Number -

M-TPA

HWS 3m Tripod Tower with mast

$230.00 USD
3-meter tripod with mast used for mounting loggers and other sensors in a weather station application. Can be placed on any slope less than 13 degrees. (Cross arms, data logger, sensors, and radiation shield sold separately.)
Overview

3-meter tripod with mast used for mounting loggers and other sensors in a weather station application. Can be placed on any slope less than 13 degrees. (Cross arms, data logger, sensors, and radiation shield sold separately.)

Specifications

Cross arm height range: 2.74 to 3.20 m (9 to 10.5 ft.)
Leg height (to top of legs): 1.32 m (4.3 ft.)
Mast diameter: 4.1 cm (1.63 in.)
Tripod footprint: 91 cm (3 ft.)
Weight: 28 lbs.
Maxium slope: 13° for installation on moderately uneven ground

Compatible items

Kits

HOBO Weather Station 3-Meter Tripod Kit
$410.00 USD
HOBO Weather Station 2-Meter Tripod Kit
$290.00 USD

Web-based Monitoring Systems - via remote communication

RX3000 Remote Monitoring Station
$1079.00 USD
MicroRX Station
From 750.00
MicroRX Water Level Station
From 850.00

USB Data Loggers - requires external sensor(s)

HOBO U30 USB Weather Station
From 715.00
HOBO USB Micro Station Data Logger
$299.00 USD

USB Data Loggers - w/external sensor(s)

HOBO U30 USB Weather Station Starter Kit
$1929.00 USD

Mounting Accessories

Grounding Kit
$90.00 USD
HWS Guy Wire Kit
$90.00 USD
1/2" Stake Kit
$60.00 USD
1/4" Stake Kit
$40.00 USD
Documents

Tripod (M-TPB, M-TPA) Setup Guide

View View
Recently Viewed
water level logger kit with HOBOware USB flash drive
Kit

HOBO Water Level Data Logger Starter Kit (30’)

Combining high accuracy water level measurements with out-of-the-box convenience, this money-saving kit includes everything needed to start logging right away.
View product
Certification

NIST Temperature Point Certification

Temperature point certification charge on a per-data logger basis.
View product
accessory-2420-BL-light-sensor-amplifier for light sensor
Adapter

2420-BL Amplifier for Bare Leads

Works with LI-COR 190R-BL and 200R-BL sensors to convert voltage to measurement used by most data loggers and system controllers. Compatible with the HOBO Analog Module to integrate with HOBOnet system.
View product
W-ADAPT-2
Adapter

2-Sensor Adapter for MX800 Data Loggers

This adapter lets you monitor multiple parameters by connecting any two sensors—DO, CT, and/or CTD—to a single HOBO MX800 water quality data logger.
View product