In order to serve you relevant web content, we need to determine your location. If you are located within the United States 
HOBO 4-Channel Pulse Data Logger
HOBO data loggers require HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.
Overview
The HOBO UX120 Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building commissioners – to easily track building energy consumption, equipment runtimes, and water and gas flow rates. The HOBO UX120 Pulse Data Logger is available in a standard memory model (UX120-017) capable of 500,000 measurements and an expanded memory version (UX120-017M) capable of over 4,000,000 measurements.
Highlighted Features
- Simultaneously measures and records pulse signals, events, state changes, and runtimes
- Stores up to over 4 million measurements, enabling longer deployments with fewer site visits
- Maximum pulse rate – 120 Hz
- Pulse input range – 0 to 24VDC
- Streamlines deployment via a range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
- Works with Onset's Energy & Power Meter to measure Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more. Learn how.
The T-VER-E50B2 Energy and Power Meter outputs (3) sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calculate AC Current, AC Voltage, kW, Power Factor, VARs, and VA. The formulas used in these calculations can be found here: 14993-A-Derived-Channels.zip
- Compatible with HOBOware and HOBOware Pro software for logger setup, graphing, and analysis
In what environment does this data logger operate?
This data logger operates in an indoor environment.
What measurements does this data logger support?
The UX120-017M data logger supports the following measurements: AC Voltage, Amp Hour (Ah), Amps (A), Event, Kilowatt Hours (kWh), Kilowatts (kW), Motor On/Off, Power Factor (PF), Pulse Input, Runtime, State Open/Closed, Volt-Amp Reactive, Volt-Amp Reactive hour, Volt-Amps (VA), Volts (V), Water Flow, Watt Hours (Wh) and Watts (W)
The HOBO UX120 Pulse Data Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building commissioners – to easily track building energy consumption, equipment runtimes, and water and gas flow rates. The HOBO UX120 Pulse Data Logger is available in a standard memory model (UX120-017) capable of 500,000 measurements and an expanded memory version (UX120-017M) capable of over 4,000,000 measurements.
Highlighted Features
- Simultaneously measures and records pulse signals, events, state changes, and runtimes
- Stores up to over 4 million measurements, enabling longer deployments with fewer site visits
- Maximum pulse rate – 120 Hz
- Pulse input range – 0 to 24VDC
- Streamlines deployment via a range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
- Works with Onset's Energy & Power Meter to measure Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more. Learn how.
The T-VER-E50B2 Energy and Power Meter outputs (3) sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calculate AC Current, AC Voltage, kW, Power Factor, VARs, and VA. The formulas used in these calculations can be found here: 14993-A-Derived-Channels.zip
- Compatible with HOBOware and HOBOware Pro software for logger setup, graphing, and analysis
In what environment does this data logger operate?
This data logger operates in an indoor environment.
What measurements does this data logger support?
The UX120-017M data logger supports the following measurements: AC Voltage, Amp Hour (Ah), Amps (A), Event, Kilowatt Hours (kWh), Kilowatts (kW), Motor On/Off, Power Factor (PF), Pulse Input, Runtime, State Open/Closed, Volt-Amp Reactive, Volt-Amp Reactive hour, Volt-Amps (VA), Volts (V), Water Flow, Watt Hours (Wh) and Watts (W)
The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available
| Inputs | |
| External Contact Input: | Electronic solid state switch closure or logic driven digital signals to 24 V |
| Maximum Pulse Frequency: | 120 Hz |
| Maximum State, Event, Runtime Frequency: | 1 Hz |
| Bits: | 4–32 bits depending on pulse rate and logging interval |
| Maximum Pulses Per Interval: | 7,863,960 (using maximum logging rate) |
| Driven Logic Signal: | Input Low: ≤ 0.4 V; Input High: 3 to 24 V |
| Absolute Maximum Rating: | Maximum Voltage: 25 V DC Minimum Voltage: -0.3 V DC |
| Solid State Switch Closure: | Input Low: < 10 KΩ; Input High: > 500 KΩ |
| Internal Weak Pull-Up: | 100 KΩ |
| Input Impedance: | Solid state switch closure: 100 KΩ pull up; Driven signal: 4.5 KΩ |
| Minimum Pulse Width: | Contact closure duration: 500 uS; Driven logic signal: 100 uS |
| Lockout Time: | 0 to 1 second in 100 ms steps |
| Edge Detection: | Falling edge, Schmitt Trigger buffer |
| Preferred Switch State: | Normally open or Logic "1" state |
| Logging | |
| Resolution: | Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event |
| Logging Rate: | 1 second to 18 hours, 12 minutes, 15 seconds |
| Time Accuracy: | ± 1 minute per month at 25°C (77°F) (see Plot A in manual) |
| Battery Type: | Two AA alkaline or lithium batteries |
| Battery Life: | 1 year, typical with logging intervals greater than 1 minute and normally open contacts |
| Memory | |
| Memory: | UX120-017: 520,192 measurements (assumes 8-bit) UX120-017M: 4,124,672 measurements (assumes 8-bit) |
| Download Type: | USB 2.0 interface |
| Download Time: | 30 seconds for UX120-017, 1.5 minutes for UX120-017M |
| Physical | |
| Operating Range: | Logging: -40° to 70°C (-40° to 158°F); 0 to 95% RH (non-condensing) Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification |
| Weight: | 149 g (5.26 oz) |
| Size: | 11.4 x 6.3 x 3.3 cm (4.5 x 2.5 x 1.3 inches) |
| Environmental Rating: | IP50 |
 |
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). |
- HOBO UX120-017M 4-Channel Pulse Input Data Logger
- 4 mounting screws
- 2 magnets
- Hook & loop tape
- 4 terminal block connectors
The following are associated resources for this product. In general users of this product can gain insight into its possible use by utilizing the resources below. Our user forum can also be a valuable resource for questions, use cases and general feedback. Share with us today, here!
Customers Also Bought
Measure runtime (time-of-use) of equipment with the CSV-A8 split-core AC current sensor along with a compatible HOBO data logger. This UL-listed sensor has built-in on/off status lights and provides an adjustable current threshold of 0.5 to 175 amps. Simply install the sensor around a current-carrying wire to the equipment to be monitored and then connect the sensor to a compatible UX90 or UX120 data logger.
Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22, and H21 data loggers.
The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Delta-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports a 3-phase Delta-connection of 208/240 VAC.
The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This data logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Data Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.
Recently Viewed
Detailed Specifications
HOBO 4-Channel Pulse Data Logger
| Inputs | |
| External Contact Input: | Electronic solid state switch closure or logic driven digital signals to 24 V |
| Maximum Pulse Frequency: | 120 Hz |
| Maximum State, Event, Runtime Frequency: | 1 Hz |
| Bits: | 4–32 bits depending on pulse rate and logging interval |
| Maximum Pulses Per Interval: | 7,863,960 (using maximum logging rate) |
| Driven Logic Signal: | Input Low: ≤ 0.4 V; Input High: 3 to 24 V |
| Absolute Maximum Rating: | Maximum Voltage: 25 V DC Minimum Voltage: -0.3 V DC |
| Solid State Switch Closure: | Input Low: < 10 KΩ; Input High: > 500 KΩ |
| Internal Weak Pull-Up: | 100 KΩ |
| Input Impedance: | Solid state switch closure: 100 KΩ pull up; Driven signal: 4.5 KΩ |
| Minimum Pulse Width: | Contact closure duration: 500 uS; Driven logic signal: 100 uS |
| Lockout Time: | 0 to 1 second in 100 ms steps |
| Edge Detection: | Falling edge, Schmitt Trigger buffer |
| Preferred Switch State: | Normally open or Logic "1" state |
| Logging | |
| Resolution: | Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event |
| Logging Rate: | 1 second to 18 hours, 12 minutes, 15 seconds |
| Time Accuracy: | ± 1 minute per month at 25°C (77°F) (see Plot A in manual) |
| Battery Type: | Two AA alkaline or lithium batteries |
| Battery Life: | 1 year, typical with logging intervals greater than 1 minute and normally open contacts |
| Memory | |
| Memory: | UX120-017: 520,192 measurements (assumes 8-bit) UX120-017M: 4,124,672 measurements (assumes 8-bit) |
| Download Type: | USB 2.0 interface |
| Download Time: | 30 seconds for UX120-017, 1.5 minutes for UX120-017M |
| Physical | |
| Operating Range: | Logging: -40° to 70°C (-40° to 158°F); 0 to 95% RH (non-condensing) Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification |
| Weight: | 149 g (5.26 oz) |
| Size: | 11.4 x 6.3 x 3.3 cm (4.5 x 2.5 x 1.3 inches) |
| Environmental Rating: | IP50 |
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). |