RX3000 Indoor Remote Monitoring Station

Operating Range

-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC

Smart Sensor Connectors

10

Smart Sensor Network Cable Length

100 m (328 ft) maximum

Smart Sensor Data Channels

Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details)

Module Slots

2

Logging Rate

1 second (RX3001 and RX3002) or 1 minute (RX3003 and RX3004) to 18 hours

Time Accuracy

±8 seconds per month in 0° to 40°C (32°F to 104°F) range;

±30 seconds per month in -40° to 60°C (-40° to 140°F) range

Battery Type/Power Source

4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR)

Rechargeable Battery Service Life

Typical 3-5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life

Memory

32 MB, 2 million measurements, continuous logging

Alarm Notification Latency

Logging interval plus 2-4 minutes, typical

Enclosure Access

Hinged door secured by two latches with eyelets for use with user-supplied padlocks

LCD

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

Materials

Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish

Size

18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page

Weight

2.2 kg

4.85 lb

Mounting

3.8 cm (1.5 inch) mast or wall mount

Environmental Rating

Weatherproof enclosure, NEMA 4X

requires proper installation of cable channel system

Compliance Symbols

RX3002: FCC ID R68XPICOW, IC ID 3867A-XPICOW

RX3003: FCC ID QIPEHS6, IC ID 7830A-EHS6; approved for use in Taiwan and Japan

RX3004: FCC ID QIPPLS62-W, IC ID:7830A-PLS62W

Wireless Radio

RX3003:

GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz

UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz

RX3004:

GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz

UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz

LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz

Antenna

RX3003: Penta band

RX3004: 4G LTE

Ethernet (RX3001)

Connector

One RJ45/100BaseT

Wi-Fi (RX3002)

Network Standards

IEEE 802.11b/g/n

Frequency Range

2.412-2.484 GHz

Antenna Connector

1, no diversity supported

Data Rates

1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps)

Number of Selectable Radio Subchannels

Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries)

Radio Modulations

OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM

Security

WEP 64/128, WPA-PSK, AES end-to-end encryption, WPA2, protocols not listed are not supported

Maximum Receive Level

-10 dBm (with PER <8%)

Receiver Sensitivity

-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps, -90 dBm for 2.0 Mbps, -92 dBm for 1.0 Mbps

Cellular (RX3003 and RX3004)

Wireless Radio

RX3003:

GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz

UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz

RX3004:

GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz

UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz

LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHz

Antenna

RX3003: Penta band

RX3004: 4G LTE