Image
Part Number -
BST-IR
Infrared (IR) Base Station
Discontinued
The Infrared (IR) Base Station is required for communications between the HOBO Water Temp Pro and the PC. Simply place the logger 4 to 5 inches away from an IR Base Station (connected to a PC) within the 30° angle of view to obtain read out. The IR Base Station requires a 9-pin serial port in the PC. The IR Base Station is compatible with USB-to-serial converter. Note: The IR Base Station is not waterproof.
Overview
The Infrared (IR) Base Station is required for communications between the HOBO Water Temp Pro and the PC. Simply place the logger 4 to 5 inches away from an IR Base Station (connected to a PC) within the 30° angle of view to obtain read out. The IR Base Station requires a 9-pin serial port in the PC. The IR Base Station is compatible with USB-to-serial converter. Note: The IR Base Station is not waterproof.
Recently Viewed
Accessory
MX2500 Electrode Storage Solution (475 mL)
Used to properly store and condition the pH electrode that is used with the HOBO MX pH Logger
Cable
Voltage Input Lead Set
A voltage lead set with alligator clips that is used to wire a WattNode terminal block connected to a WattNode KWH transducer and the voltage terminals in a circuit breaker panel.
Accessory
HOBO RX Station Field Installation Kit
Pre-selected set of premium tools typically needed to deploy a HOBO RX Station.
Data Logger
HOBO Four Analog Port Data Node
The HOBO® ZW-006 is a 4-channel wireless data node with four analog ports. It wirelessly transmits data in real time, reducing the costs and inconvenience associated with manual data offload. The HOBO® ZW-006 is a 4-channel wireless data node with four analog ports