HOBO Voltage Input Lead Set
HOBO Voltage Input Lead Set
Part Number -

A-WNB-LEADSET

Voltage Input Lead Set

$160.00 USD
A voltage lead set with alligator clips that is used to wire a WattNode terminal block connected to a WattNode KWH transducer and the voltage terminals in a circuit breaker panel.
Request A Quote
Overview

A voltage lead set with alligator clips that is used to wire a WattNode terminal block connected to a WattNode KWH transducer and the voltage terminals in a circuit breaker panel.

Features
  • Prewired to WattNode terminal block
  • Precludes mis-wiring to KWH transducer
  • No need for user to choose and supply own wiring
  • Safety and convenience
Specifications

Colors (cables and clips): Black, blue, green, red, white
Alligator clips: Insulated nickel plated brass, sheathed banana plug receptacle
Cable length: 5 feet
Suitability: Single phase circuits 120-277vac, and three phase circuits 208-480vac.
Temperature rating: -25 C to 80 C
Electrical rating: IEC 61010-031 @ 1,000V CAT II , 600V CAT III P2

Compatible items

USB Data Loggers - requires external sensor(s)

HOBO H22 Energy Data Logger
H22-001
$499.00 USD
HOBO U30 USB Weather Station
U30-NRC
From 699.00
Build a system
HOBO State Data Logger
UX90-001
$155.00 USD

Web-based Monitoring Systems - via remote communication

RX3000 Remote Monitoring Station
RX3000
$1049.00 USD
Build a system

USB Data Loggers - w/external sensor(s)

HOBO U30 USB Weather Station Starter Kit
U30-NRC-SYS-C
$1899.00 USD

Sensors

Electronic Switch Pulse Input Adapter - 1 meter Sensor
S-UCC-M001
$113.00 USD
Electronic Switch Pulse Input Adapter - 6 meters Sensor
S-UCC-M006
$124.00 USD
WattNode 208/240 VAC 3-phase Delta/Wye kWh Transducer Sensor
T-WNB-3D-240
$385.00 USD
WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor
T-WNB-3D-480
$395.00 USD
WattNode 208/240 VAC 1,2, or 3 Phase Wye kWh Transducer Sensor
T-WNB-3Y-208
$340.00 USD
WattNode 208-240 VAC 2 or 3 Branch Circuit kWh Transducer Sensor
T-WNB-3Y-208-P
$350.00 USD
Documents
View all documents

Lead Set, kWh Transducer to a Voltage Bus Bar - Instructions

View View
Recently Viewed
View all products
HOBO MX2500 Electrode Storage Solution (475 mL)
Accessory

MX2500 Electrode Storage Solution (475 mL)

Used to properly store and condition the pH electrode that is used with the HOBO MX pH Logger
View product
Communication

Infrared (IR) Base Station

The Infrared (IR) Base Station is required for communications between the HOBO Water Temp Pro and the PC. Simply place the logger 4 to 5 inches away from an IR Base Station (connected to a PC) within the 30° angle of view to obtain read out. The IR Base Station requires a 9-pin serial port in the PC. The IR Base Station is compatible with USB-to-serial converter. Note: The IR Base Station is not waterproof.
View product
array of hand tools used to install a HOBO RX Station
Accessory

HOBO RX Station Field Installation Kit

Pre-selected set of premium tools typically needed to deploy a HOBO RX Station.
View product
HOBO Four Analog Port Data Node
Data Logger

HOBO Four Analog Port Data Node

The HOBO® ZW-006 is a 4-channel wireless data node with four analog ports. It wirelessly transmits data in real time, reducing the costs and inconvenience associated with manual data offload. The HOBO® ZW-006 is a 4-channel wireless data node with four analog ports
View product