Image
Enter your search terms below:
1348 results found
HOBOware Closes with No Warning or Error
This can be a byproduct of what is called "GodMode" on later Windows OSs. It seems that this will interfere with some JAVA applications.
Read tech note
HOBO UX120-017: Dry contact, channel voltage.
When the switch is closed, low voltage (0V) is detected. When the switch is open, a 100K pull-up resistor brings the processor input pin to 3.3V.
Read tech note
HOBO MX110X buzzer decibel (dB) output
The buzzer decibel (dB) output of the HOBO MX1100 logger series is 65 dB to 75 dB, depending on battery level.
Read tech note
Wiring Diagram - Monitoring Three- Phase Energy using the HOBO UX90-001 and the Wattnode kWh Transducer
Attached is a drawing that illustrates how to use a HOBO UX90-001 State Data Logger and a T-WNB-3D-480 3-phase kWh Transducer to monitor energy consumption on a three-phase circuit.
Read tech note
Will H-series loggers work with HOBOware software?
With the exception of the H21-002 Microstation, HOBOware software is not compatible with H-series loggers.
Read tech note
Pendant Optics
Attached please find an image that shows the location of optic LEDs in Pendant (UA-series) loggers. All Pendant optics are located in the same location on all models.
Read tech note
Proper Coupler Seating, BASE-U-4 (Optic Base station) and the U-DTW-1 (Waterproof Shuttle)
The attached image shows both the incorrect and correct assembly of a logger coupler to the BASE-U-4 (Optic Base station) and the U-DTW-1 (Waterproof Shuttle).
Read tech note
Davis Rain Gauge (S-RGC-M002, S-RGF-M002 & S-RGE-M002) Cable Routing
See attached photos for clarification.
This is also covered in each product's respective manual, which can be found on the following product web pages under the Documentation tab:
Read tech note