Image
Enter your search terms below:
139 results found
How to configure differential pressure for bidirectional scaling
Set the PXU sensor to Bidirectional mode by moving the jumper to BI, as described in the attached manual.
Read tech note
Totalizing RG3 Rainfall Data
A common question when working with rain data is: How much rain per “time interval?” That could be a day, a week, a month, or whatever you are looking for.
Read tech note
Barometric Compensation Method
Barometric Compensation Method - Technical Details
This section presents the details of how the Pressure values are computed, and how Pressure and Temperature values
Read tech note
Charging a very low HOBO RX3000 or U30 battery
As mentioned in the HOBO RX3000 and U30 documentation, if the battery voltage is allowed to drop too low, it may not be charged within the logger.
Read tech note
HOBO RX3000 Manager and HOBOnode viewer will not work after Java 9 Update
If you are running HOBOware version 3.7.13 and also have updated to JAVA JRE 9, there will be an issue with the RX3000 manager and the HOBO node Manager within the HOBOware program.
Read tech note
HOBO Waterproof Shuttle U-DTW-1 LED Error Codes
The numbers below indicate a blink pattern. The first digit is the first part of the blink pattern and the second digit is the second part of the blink pattern.
Read tech note
Pendant Optics
Attached please find an image that shows the location of optic LEDs in Pendant (UA-series) loggers. All Pendant optics are located in the same location on all models.
Read tech note