Image
Enter your search terms below:
21 results found
Adding or Removing Smart Sensors from a HOBO RX3000 Station
To add or remove smart sensors from a HOBO RX3000 station:
1. If the station is currently logging, press the Stop button to stop it.
Read tech note
Wiring Diagram - Monitoring 24VAC On/Off with an RX3000 Station
Attached is a wiring diagram that shows you how to monitor the on/off state of a 24VAC circuit using the RX3000 station.
Read tech note
Charging a very low HOBO RX3000 or U30 battery
As mentioned in the HOBO RX3000 and U30 documentation, if the battery voltage is allowed to drop too low, it may not be charged within the logger.
Read tech note
How the RXMOD-A1 with HOBO RX3000 Samples Analog Data and Resolution
How many samples are collected when a measurement is taken and how long is the measurement window open?
Read tech note
Wiring Diagram - Monitoring DC Voltage and Current with the RX3000 Station
Attached is a drawing that shows how to monitor DC voltage and/or current using the RX3000 Remote Monitoring Station via the Four Channel Analog Input Module, RXMOD-A1.
Read tech note
Wiring Diagram - Monitoring a 3-Phase Circuit with the HOBO RX3000 Station and T-VER-E50B2
Attached is a wiring diagram that shows you how to connect the T-VER-E50B2 Power and Energy Meter to the HOBO RX3000 Station.
Read tech note
HOBO RX3000 Manager and HOBOnode viewer will not work after Java 9 Update
If you are running HOBOware version 3.7.13 and also have updated to JAVA JRE 9, there will be an issue with the RX3000 manager and the HOBO node Manager within the HOBOware program.
Read tech note
Wiring Diagram - HOBO RX3000 - Wiring Analog Sensors to the RXMOD-A1 Module
Attached is a diagram that shows how to connect sensors to the optional 4-channel RXMOD-A1 analog input module.
Read tech note
Cellular (GSM) Amplifier/Repeater/Extender
Below is a link to a cellular signal amplifier/repeater that may help improve mobile phone signal strength for HOBO RX3000 3G systems.
Read tech note
Wiring Diagram - Monitoring Energy Consumption on a Regenerative Drive AC Motor with the Energy Logger
Attached is a drawing that shows how to use the HOBO H22-001 Energy Logger and a Wattnode kWh Transducer to monitor bidirectional energy being used and generated by a regenerative drive AC motor (l
Read tech note