Image
Enter your search terms below:
40 results found
Connecting a Thermocouple to an RX3000 Station
In order to connect a thermocouple to an RX3000 station, you will need to use a third-party thermocouple transmitter, like the Omega TX13 series, which is available directly from Omega,
Read tech note
Wiring Diagram - Monitoring Differential Air Pressure with an RX3000
Attached is a diagram that shows how to connect and configure a Veris Differential Air Pressure Sensor (T-VER-PX-Series) with an RX3000 Station.
Read tech note
International User-Supplied SIM Modules and the HOBO RX3000
Some international SIM modules require activation prior to use. This entails calling or texting a specific telephone number provided with the SIM.
Read tech note
Using the pHionics STs pH Sensor with a HOBO RX3000 Station
This application note describes how to connect, calibrate, and operate the pHionics STs pH sensor with the HOBO RX3000 station.
Read tech note
Wiring Diagram - RX3000 and 15 Temperature Sensors with S-ADAPT-6
The attached drawing shows how to connect 15 smart temperature sensors to an RX3000 station via the S-ADAPT-6 Smart Sensor Consolidator Box.
Read tech note
Wiring Diagram - HOBO RX3000 - RXMOD-A1 Voltage Input Logic Switch
Attached is a wiring diagram that shows how to mo
Read tech note
How To Add the HOBOnet Manager to a HOBO RX3000 Station
Please click one of the links below for help adding a HOBOnet Manager to a HOBO RX3000 station.
On YouTube
Read tech note
Wiring Diagram - Monitoring 24VAC On/Off with an RX3000 Station
Attached is a wiring diagram that shows you how to monitor the on/off state of a 24VAC circuit using the RX3000 station.
Read tech note