Enter your search terms below:

Filters

Clear all

Resource Type

7 results found

HOBO U20 Stainless Steel Data Logger - sensor location

See attached diagram for sensor location in HOBO U20 stainless steel data loggers.

Read tech note

Wireline mounting a U20 water level data logger in a well

HOBO Water Level data loggers can be hung in wells using Onset's special low-stretch cable with Teflon coating, to avoid snagging and to make them easy to clean.
Read tech note

Sample Data - HOBO U20-001-XX - Multiple Intervals Example

Attached is a screenshot of a data file recorded by a HOBO U20-001-XX with multiple intervals configured. Up to eight (8) intervals can be programmed into the U20 at time of launch.

Read tech note

Using Barometric Sensor Data from the HOBO® MX2001 Water Level Logger to Compensate Raw U20/U20L Data

This instruction will describe how to use barometric pressure data from the HOBO MX2001 water lever logger to compensate HOBO U20 and U20L logger raw water pressure data using the HOBOware Pro Baro

Read tech note

Stainless steel loggers and salt water

Following is an important application note regarding the deployment of the following products: U20-001-01 – HOBO Water Level Logger U12-015 – HOBO U12 Stainless Steel Temp Logger U12-015-02 – HOBO U12 Stainless Steel Temp Logger with 5” probe
Read tech note

HOBO MX2001 Deployment Requirements

The HOBO MX2001 logger top-end unit (MX2001-TOP) is IP67-rated weatherproof, but should not be considered waterproof.

Read tech note

HOBO Water Level Logger vs the Competition

This paper highlights results from Onset's tests of the HOBO Water Level logger and comparable loggers from two competitors.

Read tech note