Image
Enter your search terms below:
290 results found
Waterproof shuttle firmware update
Follow this link to a helpful video if you need to update your waterproof shuttle firmware.
http://www.youtube.com/watch?v=8_O9-x7CPt8
Read tech note
Weather station setup
Unfortunately, we do not have installers for our weather stations. We do, however, have a series of videos along with the complete user manual to help you assemble your station.
Read tech note
Waterproof shuttle for beginners
These photos illustrate how to use the Waterproof Shuttle and a data logger together. We are showing a U22-001 logger for this demonstration, but the same steps apply to any USB-based optic logger. These steps are necessary for initial deployment of a logger and when communicating with the logger directly.
Read tech note
Boosting mV outputs to 0-2.5 DC outputs for use with HOBO stand-alone data loggers
Simple non-inverting op-amp amplifier circuit - how to boost mV to 0-2.5V DC.
Read tech note
Creating a voltage divider
A voltage divider will drop the voltage of the input signal to the level the data logger can measure.
Read tech note
Using a light intensity data logger as an inexpensive light meter
HOBO light intensity data loggers, such as the UA-002-08, are designed to give you a general comparative idea of how much light there is in an area: sunlight v. shade, lights on/off, etc. If you plan on recording specific lighting information or absolute values, these data loggers will not work for you.
Read tech note