Image
Enter your search terms below:
68 results found
-888.88 Data Values
Problem: My Smart Sensor data shows a -888.888 for a good portion of the data file.
Read tech note
Sample Data - HOBO MX2001 BLE Water Level Data in HOBOware
Attached is a screenshot from a data file produced by the HOBO MX2001 BLE Water Level Logger during a well drawdown test.
Read tech note
Totalizing RG3 Rainfall Data
A common question when working with rain data is: How much rain per “time interval?” That could be a day, a week, a month, or whatever you are looking for.
Read tech note
Verifying RH accuracy on HOBO data loggers
Testing the accuracy of relative humidity sensors requires carefully-controlled conditions and a considerable amount of time. Please see the white paper Testing the Accuracy of Sensirion Relative Humidity Sensors in HOBO Data Loggers for complete details on the recommended procedure to follow.
Read tech note
Davis Rain Gauge (S-RGC-M002, S-RGF-M002 & S-RGE-M002) Cable Routing
See attached photos for clarification.
This is also covered in each product's respective manual, which can be found on the following product web pages under the Documentation tab:
Read tech note
Sample Data - Long-Term Outdoor Temperature vs Residential Energy Consumption
Attached is a screenshot of a HOBOware Pro project file that depicts a long-term (17-month) study of outdoor temperature data vs residential energy consumption.
Read tech note
U30 and excitation wiring with S-VIA-CM14 modules
Here is a wiring diagram for use with external sensors and the S-VIA-CM14s. Remember the excitation current required to power the external sensors cannot exceed 50 milliamps total.
http://www.onsetcomp.com/files/U30%20VIA%20and%20S_VIA_CM14.JPG
Read tech note
Sample Data - HOBO U30 Station Compressed Air Flow and Compressor Power Monitoring
Attached is a screenshot from a HOBOware data file from a HOBO U30 Station that recorded compressed air flow in SCFM and compressor power in kW.
Products used were:
Read tech note