Image
Enter your search terms below:
290 results found
Wiring Diagram for p/n CABLE-PC-3.5 Serial Communications Cable
Attached is the wiring diagram for Onset's RS-232 Serial Communications Cable p/n CABLE-PC-3.5.
Read tech note
Connecting a Thermocouple to an RX3000 Station
In order to connect a thermocouple to an RX3000 station, you will need to use a third-party thermocouple transmitter, like the Omega TX13 series, which is available directly from Omega,
Read tech note
The U26-001 DO Logger and Sodium Sulfite Solution U26-CAL-SOL
After performing the optional 0% saturation lab calibration step (step #2) with the sodium sulfite solution ( Onset part number
Read tech note
HOBOware Installation Error
It has been found that, because of the size of the HOBOware installer file (currently 171 MB), some web browsers may split up the download into multiple files.
Read tech note
Unable to Read Out MX 2001 Logger
After a successful readout on an MX2001 logger that is logging, stopping the logger and then attempting to read out the same data again may fail.
Read tech note
Using Barometric Sensor Data from the HOBO® MX2001 Water Level Logger to Compensate Raw U20/U20L Data
This instruction will describe how to use barometric pressure data from the HOBO MX2001 water lever logger to compensate HOBO U20 and U20L logger raw water pressure data using the HOBOware Pro Baro
Read tech note
Optic data logger not recognized by HOBOware using Windows 8.1 or Windows 10
The new Windows power-saving updates may cause the Base Station (part number BASE-U-4) and Waterproof Shuttle (part number U-DTW-1) to appear inactive even though a data logger is physically attach
Read tech note
Soil Moisture Worksheet and Guide
Onset’s soil moisture smart sensors use Decagons’ ECA5 and 10HS sensors which are known for providing accurate and reliable results. However, a bad installation can still lead to bad data.
Read tech note