Enter your search terms below:

Filters

Clear all

Resource Type

Topic

80 results found

Sensor Location Drawing

Read tech note

Connecting to the eGauge without a network

Below are the recommended steps to establish communication with an eGauge when the eGauge Ethernet port is directly connected to the Ethernet port of a computer, and the eGauge is configured for DH

Read tech note

Build Your Own Thermistor

For instructions on how to build your own thermistor, please see attachment.

Read tech note

Voltage Divider for High Voltage Measurements

Please see attached.

Read tech note

HOBO RX3000 and the TRMSA-D FlexSmart Module

If you are using both TRMSA-D FlexSmart modules and smart sensors with your HOBO RX3000 station, you are limited to a maximum of three TRMSA-D modules and any combination of smart sensors to reach

Read tech note

Exporting Data from EG4100 Series Devices

From the home screen, click the export button in the upper left of the graph (highlighted in yellow below).

Read tech note

HOBO MX2501 pH Electrode and Logger Storage

When storing the HOBO MX2501 pH logger over an extended period of time, remove the electrode from the logger and place it in the electrode storage bottle with clean, fresh storage solution.

Read tech note

HOBO MX2501 User-Replaceable Electrode Info

With gel electrolyte and double Pellon® junctions minimizing the chance of contamination of the reference electrolyte, the user-replaceable, plastic-bodied pH electrode for the HOBO MX2501 pH logge

Read tech note

Can the HOBO MX2501 pH Logger be Used with the Total Hydrogen Scale (pHT)?

The Total Hydrogen Scale (pHT) requires custom buffers that are designed to mimic the activity of hydrogen ions in seawater.

Read tech note

Custom pH Buffers to Calibrate the HOBO MX2501 pH Logger

The HOBO MX2501 pH logger calibration procedure is only designed to work with National Bureau of Standards (NBS) pH buffers 4.01, 7.00, and 10.00.

Read tech note