Enter your search terms below:

Filters

Clear all

Language

174 results found

Remote Monitoring While Working from Home

Find out about the benefits of remote monitoring and see how wireless, touchless data loggers let you monitor your facility, greenhouse, incubators, labs. etc...from your home, or from anywhere!
Watch Webinar

Thought Leader: Data-Driven Insights for Groundwater Management & Sustainability

Learn how data-driven approaches can provide accurate, real-time data that supports long-term groundwater sustainability & better decision-making, and improves recharge outcomes.
Watch Webinar

New! HOBO pH & Temperature Data Logger

An introduction to the Bluetooth-enabled HOBO MX2501 pH & Temperature Data Logger, for long-term monitoring of pH in aquatic environments - with no need for extra equipment or complicated calibration procedures.
Watch Webinar

Using Barometric Sensor Data from the HOBO® MX2001 Water Level Logger to Compensate Raw U20/U20L Data

This instruction will describe how to use barometric pressure data from the HOBO MX2001 water lever logger to compensate HOBO U20 and U20L logger raw water pressure data using the HOBOware Pro Baro

Read tech note

Next Generation HOBOlink Introductory Webinar

Learn more about the better-than-ever HOBOlink cloud IoT software platform!

Watch Webinar

Deployment Tips for HOBO U20 Water Level Loggers

This webinar provides useful tips for successfully deploying U20 series HOBO water level data loggers.
Watch Webinar

HOBO MX1101 & InTemp CX400 - Audible Alarm Sound Levels

The audible alarm outputs a tone measured at 75db with fresh batteries, and 65db with very low batteries.

Read tech note

Locking MX logger so that no one else can configure it

Connect to the logger and tap Logger Password. Enter a password up to 10 characters. The password will then be required any time another mobile device attempts to connect to the logger.

Read tech note

Lost connection while setting up MX logger. Will it still start?

If you did not tap Start before the connection was lost, then the logger will not start logging. Connect to the logger again, finish choosing your settings, and then tap Start.

Read tech note

An alarm was tripped on my MX logger. How do I clear it?

Visual alarms are cleared based on the settings selected under “Maintain Visual Alarms Until” when configuring the logger.

Read tech note