Image
Enter your search terms below:
139 results found
Calibrating S-SMC-M005 and W-SMC Soil Moisture Sensors
The attached application note - Calibration Equations for the S-SMC-M005 Soil Moisture Sensor - details the process for calibrating soil moisture data.
Read tech note
Adding or Removing Smart Sensors from a HOBO RX3000 Station
To add or remove smart sensors from a HOBO RX3000 station:
1. If the station is currently logging, press the Stop button to stop it.
Read tech note
How the RXMOD-A1 with HOBO RX3000 Samples Analog Data and Resolution
How many samples are collected when a measurement is taken and how long is the measurement window open?
Read tech note
Electrically Noisy or Incorrect Thermocouple Readings
Electrically noisy or incorrect thermocouple measurements can occur if the USB cable is left connected between the logger and computer during your deployment.
Read tech note
Why is the RH response time less for the HOBO MX2301 vs the HOBO MX2302?
The RH response time in the HOBO MX2301 internal logger is faster than in the HOBO MX2302 external logger. This is due to the geometry of the location of the internal sensor in the loggers.
Read tech note
Moving the HOBO ZW Database from One Computer to Another
To move or copy your HOBO ZW Datanode database from one computer to another, you will need to copy a folder called "COSMOS" and all of its contents to a specifc location on the new computer.
Read tech note
-888.88 Data Values
Problem: My Smart Sensor data shows a -888.888 for a good portion of the data file.
Read tech note