Enter your search terms below:

Filters

Clear all

Applications

14 results found

U30 Analog Inputs

This information is included in the U30 manual. See attachment. Includes hardware.
Read tech note

Judd Communications Snow Depth Sensor with the U30 Remote Monitoring Station

Check out the attached PDF to find out how to use the Judd Communications Snow-Depth Sensor with the HOBO® U30 Station.

Read tech note

Sample Data - HOBO U30 Station Compressed Air Flow and Compressor Power Monitoring

Attached is a screenshot from a HOBOware data file from a HOBO U30 Station that recorded compressed air flow in SCFM and compressor power in kW.

Products used were:

Read tech note

Sample Data - HOBO U30 Station Monitoring Soil Moisture, Leaf Wetness, and Soil Temperature on a Green Roof

Attached is a screenshot from a HOBOware data file recorded by a HOBO U30 Station that recorded soil moisture, leaf wetness, and soil temperature as part of a green roof project.

Read tech note

Wiring Diagram - HOBO U30 CVIA Voltage Input Logic Switch

Attached is a wiring diagram that shows how to monitor switch closures with a HOBO U30-

Read tech note

U30 and excitation wiring with S-VIA-CM14 modules

Here is a wiring diagram for use with external sensors and the S-VIA-CM14s. Remember the excitation current required to power the external sensors cannot exceed 50 milliamps total. http://www.onsetcomp.com/files/U30%20VIA%20and%20S_VIA_CM14.JPG
Read tech note

Web-based monitoring aids building performance research at Harvard University

Holly Wasilowski is one in a team of researchers building a better computer model to judge the performance of a building.

Listen podcast

Correcting Temperature Sensitivity of ECH2O Soil Moisture Sensors Application Note

Onset adds smart sensor adapters to the ECH2O probes so that they are plug‐and‐play compatible with HOBO® U30 stations and HOBO Micro Stations.

Read tech note

Remote Water Level Monitoring Application (U30)

The combination of the HOBO Remote Monitoring System/GSM and one or two third-party water level sensors with 4-20mA analog outputs provide a solution to remotely monitor water levels and access dat

Read tech note