Image
Part Number -
KIT-D-U20-01
HOBO Water Level Data Logger Deluxe Kit (30’)
$1,610.00 USD
Combining high accuracy water level measurements with out-of-the-box convenience, this money-saving kit includes everything needed to start logging right away.
Overview
Combining high accuracy water level measurements with out-of-the-box convenience, this money-saving kit includes everything needed to start logging right away. Ideal for monitoring water levels and temperatures in wells, streams, lakes and freshwater wetlands, as well as barometric pressure.
This kit includes:
- U20-001-01 HOBO data logger (30' range)
- U20-001-04 HOBO data logger (13' range) for barometric pressure
- U-DTW-1 HOBO waterproof shuttle with 5 interchangeable couplers
- U20-CASE-1 carrying case
- HOBOware Pro software
Like other HOBO Water Level Loggers, the 30-foot version offers exceptional value and ease-of-use, with no cumbersome vent tubes or desiccants to maintain.
Features
- Lightning protection; no long signal wires, and electronics are shielded in stainless-steel housing
- HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure, temperature, and water density
- Multiple-rate sampling allows faster sampling at critical times such as when pumping starts or stops
- Available in four depth ranges
- Ideal for use in wells, streams, lakes, wetlands, and tidal areas
- No-vent-tube design for easy reliable deployment
- Durable ceramic pressure sensor
Specifications
Pressure Sensor
-
0 to 207 kPa (0 to 30 psia);approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
-
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
-
310 kPa (45 psia) or 18 m (60 ft) depth
-
Typical error - 0.05% FS, 0.5 cm (0.015 ft) water
-
-0.1% FS, 1.0 cm (0.03 ft) water
-
0.3% FS, 0.62 kPa (0.09 psi) maximum error
-
< 0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
-
90% < 1 second
-
Approximately 10 minutes in water to achieve full temperature compensation of the pressure sensor
Operation range
Factory calibrated range
Burst pressure
Water level accuracy*
Maximum error
Raw pressure accuracy**
Resolution
Pressure response time
Thermal response time (90%)†
Temperature Sensor
-
-20° to 50°C-4° to 122°F
-
0.37°C at 20°C0.67°F at 68°F
-
0.1°C at 20°C0.18°F at 68°F
-
3.5 minutes in water (typical)
-
0.1°C (0.18°F) per year
Operation range
Accuracy
Resolution (10-bit)
Response time (90%)
Stability (drift)
Logger
-
± 1 minute per month 0° to 50°C (32° to 122°F)
-
2/3 AA, 3.6 Volt Lithium, factory-replaceable
-
5 years with 1 minute or greater logging interval
-
64K bytes memory (approx. 21,700 pressure and temperature samples)
-
2.46 cm (0.97 inches) diameter, 15 cm (5.9 inches) length; mounting hole 6.3 mm (0.25 inches) diameter
-
Approximately 210 g (7.4 oz)
-
316 stainless steel, Viton® o-rings, acetyl cap, ceramic sensor
-
Logger is sensitive to shocks. Handle with care and avoid any impact. Always use proper packaging when shipping the logger.
-
Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.
-
Immediate start and delayed start
-
Offload while logging; stop and offload
-
Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
-
IP68
Real-time clock
Battery
Battery life (typical use)
Memory (non-volatile)
Dimensions
Weight
Wetted materials
Shock/drop
Logging interval
Launch modes
Offload modes
Battery indication
Environmental Rating
Notices
-
* With accurate reference water level measurement and Barometric Compensation Assistant data** Absolute pressure sensor accuracy includes all pressure drift, temperature, and hysteresis-induced errors† Maximum error due to rapid thermal changes is approximately 0.5%