Part Numbers

UX90-001UX90-001M

HOBO State Data Logger

From $110.00 USD
Records state changes, electronic pulses, and mechanical or electrical contact closures from external sensing devices.

Important Information

Requires HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.

Compatible with

HOBOware

Options for this product

Overview

Records state changes, electronic pulses, and mechanical or electrical contact closures from external sensing devices. Ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. This logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory model (UX90-001M) capable of over 346,795 measurements.

Features

  • One logger with four recording modes
  • Internal reed switch can be used to determine when a door or window is open or closed
  • Compatible with a wide range of external sensors
  • Ships with 2.5 mm input cable
  • Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis
Country of Origin
United States

Specifications

Internal Sensor

Maximum State, Event, Runtime Frequency
1 Hz
Preferred Switch State
No magnet present (normally open)

External Input

External Contact Input
Electronic solid state switch closure or logic driven voltage output
Range
0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)
Maximum Pulse Frequency
50 Hz
Maximum State, Event, Runtime Frequency
1 Hz
Pulse, Event Lockout Time
0 to 1 second in 100 ms steps
Solid State Switch Closure
Input Low: < 10 KΩ; Input High: > 500 KΩ
Internal Weak Pull-Up
100 KΩ
Input Impedance
Solid state switch closure: 100 KΩ pull up

Logger

Resolution
Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging Rate
1 second to 18 hours, 12 minutes, 15 seconds
Memory Modes
Wrap when full or stop when full
Start Modes
Immediate, push button, date & time, or next interval
Stop Modes
When memory full, push button, or date & time
Time Accuracy
±1 minute per month at 25°C (77°F) (see Plot A)
Power Source
One 3V CR2032 lithium battery and USB cable
Battery Life
1 year, typical with logging intervals greater than 1 minute and normally open contacts
Memory
UX90-001: 128 KB (84,650 measurements, maximum)
UX90-001M: 512 KB (346,795 measurements, maximum)
Download Type
USB 2.0 interface
Full Memory Download Time
10 seconds for 128 KB; 30 seconds for 512 KB
Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
LCD
LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size
3.66 x 5.94 x 1.52 cm
1.44 x 2.34 x 0.6 in.
Weight
23 g
0.81 oz
Environmental Rating
IP50
Image
CE Compliance Mark

Compatible items

Carrying Case

CASE-PELICAN-1510
$265.00 USD

Compliance Certificates

COMPLIANCE_CERT
$25.00 USD

Communication Cables

CABLE-USBMB
$16.00 USD

Batteries

HRB-TEMP-1
$12.00 USD

Graphing & Analysis

BHW-PRO-DLD
$75.00 USD
BHW-PRO-CD
$99.00 USD
BHW-PRO-USB
$99.00 USD

Kilowatt Hours (kWh)

T-WNB-3D-480
$305.00 USD
A-WNB-LEADSET
$115.00 USD
T-ACT-0750-020
$67.00 USD
T-ACT-0750-050
$67.00 USD
T-MAG-0400-05
$48.00 USD
T-MAG-0400-20
$48.00 USD
T-MAG-0400-50
$42.00 USD
T-MAG-0400-75
$42.00 USD
T-MAG-SCT-100
$64.00 USD
T-MAG-SCT-200
$62.00 USD
T-MAG-SCT-600
$75.00 USD

Motor On/Off

CSV-A8
$100.00 USD

Water Flow

T-MINOL-130-NL
$220.00 USD

What's in the box

  • HOBO UX90-001x State Data Logger
  • 2.5 mm input cable
  • Command™ strip
  • Double-sided tape
  • Hook & loop strap
  • Magnet with 2 screws

Documents

HOBO State Data Logger (UX90-001, UX90-001M) User's Manual

View View

Quick Start for the HOBO® U-Series Data Logger

View View

Customers Also Bought

Sensor

AC Current Switch Sensor

Measures equipment runtime (time-of-use); compatible with HOBO UX90 and UX120-017 data loggers.
View product
Sensor

WattNode 208/240 VAC 3-phase Delta/Wye kWh Transducer Sensor

For sub-metering, net-metering, energy management, and performance contracting applications, the WattNode 208/240 VAC 3-phase Delta/Wye kWh Transducer Sensor works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms.
View product
Sensor

WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor

For sub-metering, net-metering, energy management, and performance contracting applications, the WattNode 480 VAC 3-phase Delta/Wye kWh Transducer Sensor works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms.
View product
Data Logger

HOBO 4-Channel Pulse Data Logger

A highly versatile, 4-channel energy data logger that combines the functionality of four separate loggers into one compact unit; standard memory model.
View product