MX100
HOBO Temperature Data Logger
Bluetooth Temperature Monitoring
Important Information
Requires a compatible mobile device or Windows computer running the HOBOconnect app. System requirements for the app can be found at the bottom of the HOBOconnect software page.
Compatible with
Overview
A low-cost, splash-proof, Bluetooth-enabled data logger that measures and transmits temperature data wirelessly to mobile devices or Windows computers.
Ideal for a range of indoor monitoring applications, this self-contained wireless data logger lets you configure it and access temperature data at any time when within 100 feet of the logger, with no dedicated equipment beyond a mobile device or Windows computer running the HOBOconnect app.
Onset's free HOBOconnect app makes it fast and easy to view temperature graphs, check the operational status of MX100 loggers, configure alarm notifications, and share data files.
Features
- Set up and offload loggers wirelessly from your mobile device or Windows computer
- Exceptional value for the convenience of a Bluetooth communication logger
- Splash-proof design enables use in damp environments and spray-down applications
- Easy to deploy, offload, and share temperature data using the HOBOconnect app
- Visual alarms on the logger display and mobile app keep you notified of problems
- Set up and start monitoring in minutes!
Specifications
Temperature Sensor
-
-30° to 70°C-22° to 158°F
-
±1.0°C from -30° to -5°C±1.8°F from -22° to 23°F±0.5°C from -5° to 50°C±0.9°F from 23° to 122°F±1.0°C from 50° to 70°C±1.8°F from 122° to 158°F
-
0.04°C0.072°F
-
<0.01°C per year0.018°F per year
-
6 minutes typical to 90% in open air moving 1 m/s, unmounted
Logger
-
-30° to 70°C-22° to 158°F
-
1 mW0 dBm
-
Approximately 30.5 m line-of-sightApproximately 100 ft line-of-sight
-
Bluetooth Low Energy (Bluetooth Smart)
-
1 second to 18 hours
-
±1 minute per month at 25°C±1 minute per month at 77°F
-
CR2450 3V lithium, not replaceable
-
1 year, typical with logging interval of 1 minute and Bluetooth Always On enabled; 2 years, typical with logging interval of 1 minute and Bluetooth Always On disabled. Faster logging intervals, remaining connected with the app, excessive downloads, and paging may impact battery life.
-
30,000 measurements
-
Approximately 30 seconds; may take longer the farther the device is from the logger
-
6.9 x 4.5 x 1.1 cm2.71 x 1.76 x 0.42 inches
-
25.5 g0.90 oz
-
IP67
Compatible items
NIST Setup & Certifications
Compliance Certificates
What's in the box
- HOBO MX100 Temp Data Logger
FAQs
The temperature sensor can measure temperatures ranging from -30° to 70°C (-22° to 158°F).
The accuracy varies depending on the temperature range:
±1.0°C from -30° to -5°C (±1.8°F from -22° to 23°F)
±0.5°C from -5° to 50°C (±0.9°F from 23° to 122°F)
±1.0°C from 50° to 70°C (±1.8°F from 122° to 158°F)
The resolution of the temperature sensor is 0.04°C (0.072°F).
The temperature sensor has a drift of less than 0.01°C per year (0.018°F per year).
The typical response time to reach 90% in open air moving at 1 m/s is 6 minutes.
The logger operates within a temperature range of -30° to 70°C (-22° to 158°F).
The logger has a transmission range of approximately 30.5 meters (100 feet) line-of-sight.
The logger uses Bluetooth Low Energy (Bluetooth Smart) for wireless data transmission.
The logging rate can be set from 1 second to 18 hours.
The time accuracy is ±1 minute per month at 25°C (77°F).
The logger uses a CR2450 3V lithium battery, which is not replaceable.
The battery life is typically 1 year with a logging interval of 1 minute and Bluetooth Always On enabled. It can last up to 2 years with Bluetooth Always On disabled, depending on usage patterns.
The logger can store up to 30,000 measurements.
Downloading the full memory typically takes approximately 30 seconds, although it may take longer if the device is farther from the logger.
The dimensions are 6.9 x 4.5 x 1.1 cm (2.71 x 1.76 x 0.42 inches), and it weighs 25.5 g (0.90 oz).
The logger has an IP67 environmental rating, meaning it is dust-tight and can withstand immersion in water up to 1 meter for 30 minutes.