Image
Part Number -
S-WCB-M003
Adaptor for R.M. Young Wind Monitor-AQ
Discontinued
Connects the R.M. Young Wind Monitor-AQ Sensor (model 05305) with Onset's line of research-grade weather stations, including the HOBO U30, H21, and H22 weather stations and energy monitoring systems.
Important Information
This adapter is not compatible with models 05305L or 05305V
Overview
The S-WCB-M003 adapter connects the R.M. Young Wind Monitor-AQ Sensor (model 05305) with Onset's line of research-grade weather stations, including the HOBO U30, H21, and H22 weather station and energy monitoring systems. The R.M. Young 05305 Wind Monitor-AQ meets EPA guidelines for air quality measurements - 0.4 mph accuracy; 0.9 mph starting thresholds; for winds up to 112 mph.
Features
- Connects the R.M. Young Wind Monitor-AQ Sensor (model 05305) with Onset's line of research-grade weather stations
Specifications
Cable from adapter housing that plugs into logger: 3m (9.8 ft)
Adapter housing dimensions: 19.6 cm(7.7 in) long, 2.7 cm (1.05 in) diameter
Cable from adapter housing for connectiong screw terminal in the RM Young sensor junction box: 46 cm (18 in)
Wind speed range: '0 to 50 m/s (0 to 112 mph)
Wind speed accuracy (adapter only): 0.20 m/s (0.46 mph)
Wind speed resolution: 0.20 m/s (0.46 mph)
Wind direction range: 0 to 355 degrees
Wind direction accuracy (adapter only): 1.4 degrees
Wind direction resolution: 1.4 degrees
Compatible items
Web-based Monitoring Systems - via remote communication
USB Data Loggers - requires external sensor(s)
USB Data Loggers - w/external sensor(s)
Extension Cables
Recently Viewed
Battery
Lithium Batteries
A cellophane four-pack of long-lasting, cold-tolerant lithium AA batteries. Note: lithium batteries cannot be shipped on commercial airlines, and no more than 24 can be shipped in a single box
Data Logger
HOBO Motor On/Off AC Field Data Logger
Magnetic field intensities fall off rapidly with increasing distance from their source (motor, transformer, or even a single wire carrying a large AC current), requiring the data logger to be mounted very close to (ideally directly on) the field source, making interference from other sources less likely.Magnetic field intensities fall off rapidly with increasing distance from their source (motor, transformer, or even a single wire carrying a large AC current), requiring the data logger to be mounted very close to (ideally directly on) the field source, making interference from other sources less...