Image
Part Number -
T-SDX-93030-500
Stevens Hydrophobic Vent Tube Cap
During Gauged/Vented Water Level Readings Using Atmospheric Pressure
Please call sales at 1-508-759-9500
$61.00 USD
Important Information
This is to be used with the Stevens SDX Pressure Sensor.
Overview
Attaches to the opening of the Stevens SDX Pressure Sensor vent tube. The caps have a hydrophobic membrane that allows barometric pressure compensation without allowing water ingress, while also not requiring replacement. Unlike desiccant cartridges, this cap does not “pull" moisture out of the tube. If there is moisture in the tube already, it will remain there with the use of this cap. It is recommended that each SDX vent tube is protected from water ingress with either this cap or a desiccant cartridge (T-SDX-93030-010).
Compatible items
Recently Viewed
Sensor
Contact Closure Pulse Input Adapter - 6 meters Sensor
Connects sensors with pulse outputs to data loggers with smart-sensor inputs; compatible with contact closures; 6 m cable length.
Sensor
Wind Speed Smart Sensor
Measures wind speed from 0 to 76 m/s (0 to 170 mph); 3 m cable length.
Sensor
R.M. Young Wind Sentry (model 03002) Adapter Sensor
Connects the R.M. Young Wind Sentry Sensor (model 03002) with Onset's research-grade weather stations, including the HOBO U30, H21, and H22 weather station and energy monitoring systems.Connects the R.M. Young Wind Sentry Sensor (model 03002) with Onset's research-grade weather stations, including the HOBO U30, H21, and H22 weather station and energy monitoring systems.
Sensor
Setra Differential Air Pressure - 0-5 inch WC Sensor
The 0-5 inch WC Differential Air Pressure sensor by Setra can be used for static or differential pressure in air or inert gases. This sensor is fully protected against reverse wiring and against over-pressure to 10psi, and outputs 0-5 VDC to the required FlexSmart Analog Module.