Resources for U30-NRC-SYS-C

HOBO U30 USB Weather Station Starter Kit

U30-NRC-SYS-C Data Sheet
90 results found.

SMS text messaging

Sending SMS through mobile phones is easy. If you can be reminded through email, you can now be reminded through SMS.

U30 and excitation wiring with S-VIA-CM14 modules

Here is a wiring diagram for use with external sensors and the S-VIA-CM14s. Remember the excitation current required to power the external sensors cannot exceed 50 milliamps total. http://www.onsetcomp.com/files/U30%20VIA%20and%20S_VIA_CM14.JPG

Smart sensor cable fix

Problem: My smart sensor data shows a -888.888 for a good portion of the data file. Note: -888.888 means that the logger could not find the smart sensor after the logger was launched successfully.

Verifying RH accuracy on HOBO data loggers

Testing the accuracy of relative humidity sensors requires carefully-controlled conditions and a considerable amount of time. Please see the white paper Testing the Accuracy of Sensirion Relative Humidity Sensors in HOBO Data Loggers for complete details on the recommended procedure to follow.

3-phase Wattnode product comparison

Judd Communications Snow Depth Sensor with the U30 Remote Monitoring Station

Check out the attached PDF to find out how to use the Judd Communications Snow-Depth Sensor with the HOBO® U30 Station.

Working with Onset’s Outdoor Stand-alone Family of Loggers

Use HOBOware to configure, launch, readout, and plot data from the HOBO H21-002 Micro Station, U30-NRC Station, U23 Pro v2 Temp/RH loggers, and RG3 series. (Runtime: approximately 1hr 50min)

How to use HOBOware's filter function to better analyze your data

Harness the power of HOBOware by using filters to make your data more meaningful.

HOBOware's Pulse Scaling Assistant

Learn how to scale raw pulses using the Pulse Scaling Data Assistant

HOBOware Pro's kWh Assistant

Learn how to use the kWh Assistant to scale pulses from kWh Transducers into kW and kWh