Resources for UX120-017

HOBO 4-Channel Pulse Data Logger

UX120-017 Data Sheet
50 results found.

Logger power failure and data loss

The data is stored on non-volatile EEPROM. For data loggers with external batteries: change batteries and offload data, then relaunch normally. For data loggers with internal batteries: as long as the EEPROM has not been damaged, the data can be retrieved by Onset. Please contact the place of purchase for a return authorization number and request data back service.

Creating a voltage divider

A voltage divider will drop the voltage of the input signal to the level the data logger can measure.

Data logger is shutting off prematurely

A discharge of static electricity may cause a running data logger to stop recording. Precautions should be taken to prevent this while handling the data logger. Discharges may occur when there is a charge difference between the data logger and a cable being connected to it or when a person touches an exposed jack.

3-phase Wattnode product comparison

T-VER-E50B2 operation

The T-VER-E50B2 Energy and Power Meter outputs three sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calculate AC Current, AC Voltage, kW, Power Factor, VARs, and VA. /files/14993-A-Derived-Channels.zip

Working with the HOBO UX120 Family of Data Loggers

This course teaches you how to configure, launch, readout, and plot data from the HOBO UX120 family of loggers and includes the T-VER-E50B2. (Runtime: Approximately 1hr 40min)

Working with HOBO Data Loggers for Energy Monitoring

Familiarize yourself with Onset products for monitoring electrical energy. Includes logger installation examples and electrical safety information. (Runtime: approximately 1hr 45min)

Sample Data - Derived Data Series and the T-VER-E50B2

The T-VER-E50B2 Power & Energy Meter supports monitoring of single-phase as well as split- and three-phase circuits that have a neutral available and also circuits that do not include a neutral

Wiring Diagram - Monitoring Energy with a UX120-017 and T-VER-E50B2

Attached is a diagram that shows you how to use a T-VER-E50B2 Power and Energy Meter and UX120-017 data logger to monitor energy in a 3-phase circuit.

Warning:

Merging data files using HOBOware Pro, a deep dive

Learn how to use the power of HOBOware Pro to combine data files