Resources for H22-001

HOBO H22 Energy Data Logger

H22-001 Data Sheet
62 results found.

Logger power failure and data loss

The data is stored on non-volatile EEPROM. For data loggers with external batteries: change batteries and offload data, then relaunch normally. For data loggers with internal batteries: as long as the EEPROM has not been damaged, the data can be retrieved by Onset. Please contact the place of purchase for a return authorization number and request data back service.

How often do temperature data loggers need recalibration and/or servicing?

All sensors drift over time and they can be tested in a controlled environment to make sure that they are running within the specifications outlined in the User's Manual. You can use methods such as a simple ice bath or an environmental chamber to verify your device is operating correctly.

Boosting mV outputs to 0-2.5 DC outputs for use with HOBO stand-alone data loggers

Simple non-inverting op-amp amplifier circuit - how to boost mV to 0-2.5V DC.

Weather station setup

Unfortunately, we do not have installers for our weather stations. We do, however, have a series of videos along with the complete user manual to help you assemble your station.

Logging duration calculation table

H22-001 grounding

See attached PDF

Data logger is shutting off prematurely

A discharge of static electricity may cause a running data logger to stop recording. Precautions should be taken to prevent this while handling the data logger. Discharges may occur when there is a charge difference between the data logger and a cable being connected to it or when a person touches an exposed jack.

Smart sensor cable fix

Problem: My smart sensor data shows a -888.888 for a good portion of the data file. Note: -888.888 means that the logger could not find the smart sensor after the logger was launched successfully.

Verifying RH accuracy on HOBO data loggers

Testing the accuracy of relative humidity sensors requires carefully-controlled conditions and a considerable amount of time. Please see the white paper Testing the Accuracy of Sensirion Relative Humidity Sensors in HOBO Data Loggers for complete details on the recommended procedure to follow.

3-phase Wattnode product comparison