Image
Enter your search terms below:
380 results found
T-VER-E50B2 operation
The T-VER-E50B2 Energy and Power Meter outputs three sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calculate AC Current, AC Voltage, kW, Power Factor, VARs, and VA.
/files/14993-A-Derived-Channels.zip
Read tech note
Installing Onset soil moisture sensors
Use the attached guide as a reference when deploying soil moisture Smart Sensors.
Read tech note
Verifying RH accuracy on HOBO data loggers
Testing the accuracy of relative humidity sensors requires carefully-controlled conditions and a considerable amount of time. Please see the white paper Testing the Accuracy of Sensirion Relative Humidity Sensors in HOBO Data Loggers for complete details on the recommended procedure to follow.
Read tech note
Connecting a 4-20mA to an external input
The 4-20mA cable (CABLE-4-20mA) measures currents from 0 to 20.1mA. The cable must be connected such that the current flows through, and with the proper polarity, as shown in the diagram. (Do not expose to current above 20mA or negative current.) Do not cut off the end of the gray cable where it connects to the blue and yellow wires, as this contains the precision resistor required for current measurements.
Read tech note