Image
Enter your search terms below:
290 results found
Locking MX logger so that no one else can configure it
Connect to the logger and tap Logger Password. Enter a password up to 10 characters. The password will then be required any time another mobile device attempts to connect to the logger.
Read tech note
Checking MX logger remaining battery power and logger status with HOBOmobile instead of checking the logger LCD
If your device is within range of the logger, you can view the logging status in the Recently Seen/In Range List on the HOBOs screen.
Read tech note
Lost connection while setting up MX logger. Will it still start?
If you did not tap Start before the connection was lost, then the logger will not start logging. Connect to the logger again, finish choosing your settings, and then tap Start.
Read tech note
MX logger is listed in the wrong group. How can I change that?
- Connect to the logger, tap Configure, and then tap Group.
- Select a group for the logger or create a new group.
- If you do not want the logger to be listed in any group, th
Read tech note
I can't connect to MX logger in the Recently Seen/In Range list
- Close HOBOmobile and then reopen it.
- Power cycle the mobile device and try connecting again.
Read tech note
MX logger not appearing in the Recently Seen/In Range list on the HOBO screen
- The logger may need new batteries.
Read tech note
Cell constant note
Because the U24 data logger uses a noncontact AC conductivity measurement system, the cell constant varies over the measurement range.
Read tech note
Judd Communications Snow Depth Sensor with the U30 Remote Monitoring Station
Check out the attached PDF to find out how to use the Judd Communications Snow-Depth Sensor with the HOBO® U30 Station.
Read tech note