Enter your search terms below:

Filters

Clear all

Resource Type

Topic

172 results found

Sample Data - HOBO MX2301 with Statistics

Attached is a screenshot from HOBOware software of data recorded outdoors with the HOBO MX2301 Temp/RH Logger. The data was offloaded with the HOBOmobile app and shared in HOBOware format.

Read tech note

Sample Data - HOBO U12-012 Temp, RH, Light, and CO2

Attached is a screenshot of a HOBO U12-012 Temp/RH/Light/External Input data file with the Telaire 7001 CO2 sensor connected to the external input.

Read tech note

Telaire 7001 Manufacturers Manual

Attached please find the manufacturer's manual that is shipped with each Telaire 7001 CO2 Sensor

Read tech note

ACT Evaluation Report on the HOBO U26 DO Logger

The HOBO U26 Dissolved Oxygen logger has been part of a multi-year evaluation of DO loggers and sensors by the Alliance for Coastal Technologies (ACT), and the results have just been published onli

Read tech note

Wiring Diagram - HOBO RX3000 - Wiring Analog Sensors to the RXMOD-A1 Module

Attached is a diagram that shows how to connect sensors to the optional 4-channel RXMOD-A1 analog input module.

Read tech note

ZW (Zigbee 802.15.4) Radio Channels vs WiFi (802.11)

Attached is a drawing that depicts IEEE802.11 (WiFi) radio channels vs IEEE802.15.4 radio channels

Read tech note

HOBO UX120-006M Input Impedance

To a DC signal, the input resistance is extremely high. The input signal is buffered by an operational amplifier buffer circuit with typically 1013 ohms resistance.

Read tech note

Internal Thermistor Location in Pendant Loggers (UA-00x)

Attached is a drawing that shows where the internal thermistor is located in the HOBO UA-001-08/64, the UA-002-08/64, and the UA-003-64.

Read tech note

HOBO U12-015 Internal Thermistor Location

Attached is an image that depicts the location of the internal thermistor on the HOBO U12-015 data logger.

Read tech note