Image
Enter your search terms below:
18 results found
Mounting the MX2301 into the RS1 Radiation Shield
See how to unpack and install the HOBO MX2301 Bluetooth Temp/RH logger into the RS1 Radiation shield
Watch how-to video
How to Replace the pH Electrode on the HOBO MX2501 pH Logger
This video provides guidance on the proper method for replacing the pH electrode in an Onset HOBO MX2501 pH and temperature logger.
Watch how-to video
Why is the RH response time less for the HOBO MX2301 vs the HOBO MX2302?
The RH response time in the HOBO MX2301 internal logger is faster than in the HOBO MX2302 external logger. This is due to the geometry of the location of the internal sensor in the loggers.
Read tech note
HOBO MX2501 User-Replaceable Electrode Info
With gel electrolyte and double Pellon® junctions minimizing the chance of contamination of the reference electrolyte, the user-replaceable, plastic-bodied pH electrode for the HOBO MX2501 pH logge
Read tech note
Unable to Read Out MX 2001 Logger
After a successful readout on an MX2001 logger that is logging, stopping the logger and then attempting to read out the same data again may fail.
Read tech note
HOBO MX2501 pH Electrode and Logger Storage
When storing the HOBO MX2501 pH logger over an extended period of time, remove the electrode from the logger and place it in the electrode storage bottle with clean, fresh storage solution.
Read tech note
MX2001 - Submersion of Upper Portion of the Logger
The top part of the HOBO MX2001 logger includes a barometric-pressure sensor and its associated sensor port.
Read tech note
Changing Out the Electrode on the HOBO MX2501 pH Logger
This video resouce will show you how to easily change out the electrode on your pH logger.
Read tech note