Image
Enter your search terms below:
290 results found
ZW (Zigbee 802.15.4) Radio Channels vs WiFi (802.11)
Attached is a drawing that depicts IEEE802.11 (WiFi) radio channels vs IEEE802.15.4 radio channels
Read tech note
HOBO UX120-006M Input Impedance
To a DC signal, the input resistance is extremely high. The input signal is buffered by an operational amplifier buffer circuit with typically 1013 ohms resistance.
Read tech note
Internal Thermistor Location in Pendant Loggers (UA-00x)
Attached is a drawing that shows where the internal thermistor is located in the HOBO UA-001-08/64, the UA-002-08/64, and the UA-003-64.
Read tech note
HOBO U12-015 Internal Thermistor Location
Attached is an image that depicts the location of the internal thermistor on the HOBO U12-015 data logger.
Read tech note
4-20mA Current Loop Isolator
Below is a link to a current loop isolator that Onset has tested with our data loggers.
Read tech note
HOBO MX2303 - Two External Temp - Channel Identification
Attached are three screenshots from the HOBOmobile app that will help you identfy each temperature channel on your HOBO MX2303 BLE data logger.
Read tech note
HOBO MX1101 & InTemp CX400 - Audible Alarm Sound Levels
The audible alarm outputs a tone measured at 75db with fresh batteries, and 65db with very low batteries.
Read tech note
HOBO MX2001 - Cable-Ordering Guide
Attached is a PDF file to assist you in determining the proper cable length for your HOBO MX2001 deployment.
Read tech note