Image
Enter your search terms below:
129 results found
Measure Direct Current with the HOBO RX3000 and the T-VER-H971 Transducer
To measure Direct Current using the HOBO RX3000 and the T-VER-H971 transducer, see attachment.
Read tech note
HOBO UX120-017: Dry contact, channel voltage.
When the switch is closed, low voltage (0V) is detected. When the switch is open, a 100K pull-up resistor brings the processor input pin to 3.3V.
Read tech note
HOBO MX110X buzzer decibel (dB) output
The buzzer decibel (dB) output of the HOBO MX1100 logger series is 65 dB to 75 dB, depending on battery level.
Read tech note
Wiring Diagram - Monitoring Three- Phase Energy using the HOBO UX90-001 and the Wattnode kWh Transducer
Attached is a drawing that illustrates how to use a HOBO UX90-001 State Data Logger and a T-WNB-3D-480 3-phase kWh Transducer to monitor energy consumption on a three-phase circuit.
Read tech note
Wiring Diagram - HOBO UX120-006M, U12, H08 Voltage Logic Switch
Attached is a wiring diagram that shows how to monitor switch closures with a HOBO UX12
Read tech note
Wiring Diagram - Monitoring Multiple Single-Phase Circuits with the Wattnode with P3 Option
Attached is a wiring diagram that shows how to monitor Wattnode kWh transducers with th
Read tech note
Sample Data - Energy Consumption, Indoor & Outdoor Temperature - HOBO H22-001 Energy Logger
Attached is a screenshot from our HOBOware Pro software that depicts data recorded by the HOBO H22-001 Energy Logger over a 24-hour period, in a residence.
Read tech note