Image
Enter your search terms below:
129 results found
T-VER-E50B2 operation
The T-VER-E50B2 Energy and Power Meter outputs three sets of pulses that are logged by the UX120-017. These pulses represent Watt-hours, Amp-hours, and VAR-hours. HOBOware software uses these pulse values to calculate AC Current, AC Voltage, kW, Power Factor, VARs, and VA.
/files/14993-A-Derived-Channels.zip
Read tech note
Thermocouple wire material rating
Below are ratings on the material, not to be confused with measurement range.
Common TC types used on HOBO data loggers:
Type-J and Type-T wire is Teflon insulated and rated up to +400°F (+200°C) continuous, and +482°F (+250°C), for 24 hours
Type-K wire is glass-braid insulated and rated up to +900°F (+482°C) continuous, and +1000°F (+537°C) for a short single exposure.
Read tech note
Making beaded probes on a thermocouple wire
A thermocouple is a kind of battery made by joining two dissimilar metals together where a small voltage is generated by the difference between teh metals. The voltage gnerated changes with temperature. To make a thermocouple temperature sensor out of thermocouple extenision wire, strip the insulation back a little and make an electrical connection between the two wires. The more reliable your connection, the more reliable the thermocouple. Welding is the best way to form a reliable thermocouple. A resistance welding machine (spot welder) can be used (with practice), and TIG welding works nicely too.
Read tech note
How often do temperature data loggers need recalibration and/or servicing?
All sensors drift over time and they can be tested in a controlled environment to make sure that they are running within the specifications outlined in the User's Manual. You can use methods such as a simple ice bath or an environmental chamber to verify your device is operating correctly.
Read tech note
Event data logging vs State data logging
A HOBO Event data logger records the opening of the contacts only. It does not record the closing. A HOBO State data logger records changes in the state - both the opening and closing of the switch, (door open/close, light on/off, etc.). Event data will accumulate over time and totalize whereas state data will indicate a high or low position. Some HOBO series support both state and event data logging.
Read tech note
Possibility of exposure to chemicals or chemical vapors
This is dependent on the data logger you are using and the chemical and/or concentration of the chemical to which the data logger is exposed. Many chemicals will have an adverse effect on the data loggers and/or the sensors that the loggers utilize. Contact your authorized sales representative with questions regarding specific chemical contact with the data logger that you are using.
Read tech note
Protecting data loggers from electrical discharge (ESD)
A discharge of static electricity may cause a running data logger to stop recording. Precautions should be taken to prevent this while handling the data logger. Discharges may occur when there is a charge difference between the data logger and a cable being connected to it or when a person touches an exposed jack.
Read tech note