Image
Enter your search terms below:
17 results found
HOBO MX2001 Deployment Requirements
The HOBO MX2001 logger top-end unit (MX2001-TOP) is IP67-rated weatherproof, but should not be considered waterproof.
Read tech note
HOBO MX2001 - Cable-Ordering Guide
Attached is a PDF file to assist you in determining the proper cable length for your HOBO MX2001 deployment.
Read tech note
Why is the RH response time less for the HOBO MX2301 vs the HOBO MX2302?
The RH response time in the HOBO MX2301 internal logger is faster than in the HOBO MX2302 external logger. This is due to the geometry of the location of the internal sensor in the loggers.
Read tech note
HOBO MX2501 User-Replaceable Electrode Info
With gel electrolyte and double Pellon® junctions minimizing the chance of contamination of the reference electrolyte, the user-replaceable, plastic-bodied pH electrode for the HOBO MX2501 pH logge
Read tech note
Unable to Read Out MX 2001 Logger
After a successful readout on an MX2001 logger that is logging, stopping the logger and then attempting to read out the same data again may fail.
Read tech note
HOBO MX2501 Calibration Solution Safety Data Sheet
Click on the link below for the HOBO MX2501 calibration solution safety data sheet (SDS)
Read tech note
HOBO MX2501 pH Electrode and Logger Storage
When storing the HOBO MX2501 pH logger over an extended period of time, remove the electrode from the logger and place it in the electrode storage bottle with clean, fresh storage solution.
Read tech note
Sample Data - HOBO MX2001 BLE Water Level Data in HOBOware
Attached is a screenshot from a data file produced by the HOBO MX2001 BLE Water Level Logger during a well drawdown test.
Read tech note